Celebrating the Successes of Young Women in Our Industry

March 9, 2020

In honor of International Women’s Day, MCAA GreatFutures & WiMI celebrate all of the young women actively pursuing a career in the mechanical contracting industry. Read these success stories of female MCAA Student Chapter members and how they are leaving an imprint on the industry:

Madelyn Conway, Purdue University

Madelyn Conway, a senior at Purdue University, has accepted a full-time position with BMWC Constructors, Inc. She will be working as a project engineer in their Indianapolis office following graduation this spring. Madelyn said, “because of MCAA, MCA of Indiana, and the Purdue MCA Student Chapter, I have found my career!”

Madelyn was the 2019 recipient of the Ferguson – WiMI Scholarship.

Read the full story HERE.

Kathy Deng, University of Southern California 

Kathy Deng, a Mechanical Engineering graduate from the University of Southern California, a past MCAA student chapter member and a current Design Engineer at Murray Company. Kathy says at the MCAA19 convention, “Women in the Mechanical Industry enlightened me about the value of mechanical engineers in construction.”

Read the full story HERE.

Paige Theby, University of Missouri-Columbia

Paige Theby, a member of the MCAA Student Chapter at the University of Missouri-Columbia, is graduating with a B.S. in Mechanical and Aerospace Engineering and accepting a full-time position with Murphy Company.

Read the full story HERE.

Molly Sizemore, Pennsylvania State University

Molly Sizemore has accepted her second summer internship at Southland Industries, a member of the MCA of Metropolitan Washington. She is a member of the MCA of Central Pennsylvania-sponsored student chapter at Pennsylvania State University, where she studies Architectural Engineering specializing in mechanical systems. She said, “MCAA has definitely created a springboard for me into the mechanical contracting industry, and I’m very excited to continue this journey and get others involved.”

Molly is a recipient of the 2020 Ferguson – WiMI Scholarship.

Read the full story HERE.

Alex Berman, Kent State University

Alex Berman, a 2019 Construction Management graduate from Kent State University and a past MCAA Student chapter member, has found success in the industry as an Estimator and Project Assistant at MCA of Cleveland member Geauga Mechanical in Northeast Ohio.

Read the full story HERE.

Kylie Nedelka, University of Missouri-Columbia

Kylie Nedelka, a mechanical engineering major from the University of Missouri-Columbia, has accepted a second summer internship with SIEMENS, a member of MCAA’s Manufacturer/Supplier Council. Kylie found the opportunity at the 2018 GreatFutures Forum, where she met Kristin Junia, Program Manager at SIEMENS. Kylie said, “My experience was so great, that I have accepted a position as an engineering intern for this upcoming summer! I look forward to the new experiences to come!”

Read the full story HERE.

Related Articles
Following an energy audit, McKinstry specified Uponor’s flexible Ecoflex preinsulated piping to resolve a remote Minnesota school’s longtime heating problems and save the school thousands in energy costs. Ecoflex proved easy to install, allowing workers to lay hundreds of feet of piping in just one week.…
MCAA’s Virtual Trade Show connects our contractor members with the members of MCAA’s Manufacturer/Supplier Council.…
Prefabrication was just one of the ways that Olson Plumbing and Heating leveraged Viega ProPress to take on a mountain of a project: building a new visitor’s complex at the summit of Pikes Peak that met strict environmental standards … during the COVID-19 pandemic. “We prefabbed all the domestic and hydronic piping, as much as we could, to minimize labor at the top,” said Josh Crippen, superintendent at Olson. “We prefabbed our pump skids, all the water heater and boiler skids, all the waste and vent piping. As much as possible.”…
The Manufacturer/Supplier Training area of MCAA’s website connects our contractor members with training opportunities available from the members of MCAA’s Manufacturer/Supplier Council.…

MCAA's Fabrication Conference, powered by @msuitetech is going to Seattle, November 2-4, 2022 with a tour of one of the country’s most dynamic mechanical contractors, @McKinstryCo. Mark your calendars – Registration opens on August 15th at 9am Eastern!

Learn about the next evolution of infrastructure & attend MCAA's webinar on Clean Energy: Geothermal Energy Exchange on August 18 at 3pm ET. MCAA President Robert M. Bolton will be joined by subject matter expert on geothermal HVACR technologies, Jay Egg. http://ow.ly/yfWJ50KaVPs

Looking for the latest from Morris Group International and @setonsafety? Find it in MCAA’s Virtual Trade Show!

http://ow.ly/vlpe50K40Y8

The PCA & Lexington Plumbing teamed up for the '22 PCA Plumbing Service Conference, Sept. 14-15. The event will include a hosted facility tour of Lexington Plumbing. Registration is now open. Space limited to 65 participants – register today!
Learn more >> https://www.mcaa.org/events/calendar/2022-pca/

Load More...