Did You Miss Our Webinar on BIM to Field Software?

August 29, 2016

In August, MCAA released its third installment of the Construction Technology Research Series with a report on BIM to Field Software.  The research, provided by our technology partners at JB Knowledge, evaluated over 24 different types of software that leverage the data from the BIM model and use it in other parts of your operations like the field or in the fabrication shop.

On Tuesday, August 23, the lead researcher on the project, Josh Bone, joined Sean McGuire, MCAA’s Director of Construction Technology for a companion webinar that provided more explanation and detail into the project.  If you missed it, the webinar can be viewed by clicking the image below.

BIM_Screenshot

As more installments of the Construction Technology Research Series are released, additional companion webinars will be developed.  Upcoming reports will focus on Mechanical Service Software, Robotic Total Stations and Safety Hardware and Software.

Related Articles
A new report provides MCAA members with a mechanical industry specific look at how MCAA members are using construction technology. The report, developed by JBKnowledge, is based on the 2020 Construction Technology Report released in March.…
Helm Group, Inc. (formerly Mechanical, Inc.) combines leading technology like BIM 360 within Autodesk Construction CloudTMwith Lean construction principles to implement new design, engineering, and construction methods. For example, by fabricating multitrade skids in an offsite fabrication shop, Helm Group increases collaboration and drives efficiencies to deliver highly complex projects while achieving certainty in cost, schedule, and quality. BIM 360 enables the coordination and data sharing that allows the fabrication to be so accurate that, once it arrives onsite, all that is necessary is to lift it into place and install it.…
The International Association of Plumbing and Mechanical Officials (IAPMO), in conjunction with Special Pathogens Laboratory (SPL), will offer an interactive ASSE 12080 Legionella Water Safety and Management Specialist Certification Training. Three dates are available: June 7-9, August 23-25, and October 18-20.…
MCAA’s MEP Innovation Conference delivered contractor-based case studies to over 1,300 attendees and demonstrated how members are using these tools to thrive in today’s industry. Over three days, 32 breakout sessions, 30 roundtables and more than 100 exhibitor demonstrations, contractors learned about the arsenal of new tools designed for a digital age. Sessions focused on real-world practical applications in use by contractors. …

Are you joining us THIS THURSDAY for a very special webinar with football legend turned entrepreneur, @JoeMontana? Co-hosted by BuildOps, you’ll hear Joe’s take on leadership, teamwork, and how to be your best in every situation. Don't forget to register –http://ow.ly/QeYM50Fadq5

.@Havtech and @MacDonaldMiller are among the MCAA members using @XOiTechnologies to capture facilities information that helps them improve service and better communicate with clients.

http://ow.ly/xmnX50F7Jy4

Tune in on Friday, June 18th at 2pm Eastern for MCAA’s Sponsor Spotlight #22 with Bob Bolton, MCAA President-Elect and Wayne Garrett, Managing Director, NA Applied Equipment for @carrier. Register today at http://ow.ly/fOVh50EREzC

Make complying with the OSHA hazard communication standard easier by subscribing to SDS Binderworks today! There is a subscription plan to meet a variety of budgets and needs. Learn more at http://ow.ly/g4wY50F7Nfp

Load More...