THE CROSBY GROUP Issues Remove from Service Notice for Select Screw Pin Anchor Shackles

February 15, 2022

THE CROSBY GROUP has issued a remove from service and arrange for return and replacement notice for a selection of screw pin anchor shackles. These shackles may have a condition that can reduce the ultimate load capacity from the published catalog values. The shackle bow may have a previously undetected indication, and continued use may result in loss of load, property damage, severe injury, or death.

This notice only applies to the following screw pin anchor shackles with Production Identification Codes (PIC) TXJ located on the shackle bow:

  • 1018534 1” 8.50t G-209 Shackle
  • 1018543 1” 8.50t S-209 Shackle
Related Articles
MCAA’s Virtual Trade Show connects our contractor members with the members of MCAA’s Manufacturer/Supplier Council.…
Winger Companies tackled two challenges—the growing scale of its fabrication projects and a tight labor market—with Watts-Mueller machines that allowed them to do more with fewer people. General Manager Mike Smith said, “We increased our finished fabrications while cutting the cost of both consumables and manhours.” …
Head injuries are preventable…all 50,000 per year! To celebrate 20 years of safety excellence, MCAA is releasing five impactful videos in 2023 to help improve safety & health across the entire industry.…
To maintain project schedules and costs, mechanical contractors must purchase major equipment and materials as soon as they receive the notice to proceed. MCAA’s Why Mechanical Contractors Should be Paid for Materials Stored On and Off the Jobsite explains the importance of prompt payment for material storage, insurance and handling in maintaining working capital. It’s just one of MCAA’s educational resources that are free to MCAA members as a benefit of membership.…

3 days left to secure early bird pricing for the 2023 MEP Innovation Conference powered by @TrimbleCorpNews @MilwaukeeTool @procoretech! 3 days with over 30 breakouts, 5 demos, 4 general sessions, 3 facility tours, and lots of networking >> http://ow.ly/KVhc50LQtsA

Winger Companies tackled two challenges—the growing scale of its fabrication projects and a tight labor market—with @WattsMueller machines that allowed them to do more with fewer people.

http://ow.ly/bh2v50LHtIZ

Load More...