Organization: MCAA

3M™ PROTECTA® Rebel Self Retracting Lifelines – Pre-Use Inspections Required

A limited number of 3M™ PROTECTA® Rebel Self Retracting Lifelines produced between October 14, 2019 and February 25, 2020 may have a manufacturing issue. However, the issue can be easily detected through a pre-use inspection described in detail by 3M. If after carefully following 3M’s pre-use inspection instructions the SRLs are not working properly, take them out of service immediately, and contact the 3M customer service department at 1-800-328-61446 or by e-mail at 3musfpserviceaction@mmm.com.

LEARN MORE

We’ve Added New Videos on the Best from MSCA

We are continually blown away by the knowledge, novel ideas and new innovations that our members hold. And we are so appreciative that they are willing to share these ideas for the betterment of our industry. MSCA’s series of educational videos called the Best From MSCA, contain short interviews that are certain to inspire you and impact the way you conduct your business.

David Geith, Vice President of Service at EMCOR Services Mesa Energy Systems in Irvine, California moderates the conversations covering a variety of topics highlighting current issues and trends in our industry.

Check out the new videos just uploaded; Team Engagement with Jim Bartolotta and Vehicle Hand Washing Station with Rich Happel, LEED AP.  We’ll continue to add more videos each month so make sure to check back frequently!

Ahern Boosts Productivity in the Field with MILWAUKEE TOOL’s Battery-Powered Lineup

MILWAUKEE TOOL’s product lineup has long been J.F. Ahern Co.’s choice of power tools because the same batteries could be used for a broad range of tools, saving time and money. Recently, Ahern had the opportunity to test out some of MILWAUKEE TOOL’s new MX FUEL™ Equipment System, including the first-ever cordless core drill, on a project that required drilling more than 1,500 holes through various types of walls, including block and concrete. Ahern found that the handheld core drill was much more efficient than a traditional drill, providing more control and more power. MILWAUKEE TOOL is an MCAA benefactor sponsor.

LEARN MORE

Looking for More Smart Solutions?

Visit the Smart Solutions Case Studies area of our website! You’ll see how other mechanical contractors found their win-win with productivity-enhancing and cost-saving applications from members of MCAA’s Manufacturer/Supplier Council.

Plus, you’ll find tips and ideas on other ways you and your company can save money and enhance your productivity.

VISIT SMART SOLUTIONS

Markus Brettschneider Named Viega’s CEO and President

Viega LLC has named Markus Brettschneider as its new CEO and President. He replaces Dave Garlow, who resigned effective September 1 after 20 years with the company. “I was attracted to Viega because of the culture, the customers, the portfolio and the great opportunities to grow,” he said. “When the opportunity came up, it was really quite a simple decision. I like working for a family-owned company with strong values and great culture, and I’m excited to continue this growth journey with the team.”

“Mr. Brettschneider is a growth-driven leader with many years of extensive professional and management experience in the international and American markets. He grew up in Germany, but spent almost his entire professional life outside of his home country – including more than eight years in the United States,” said Claus Holst-Gydesen, CEO of Viega Holding GmbH & Co.

Markus was hired after an international search. He most recently was with ABB, where he was Group Senior Vice President and Global Head of Marketing and Sales for Industrial Automation and Global Head of Group Solutions & Channels. ABB is a global technology company specializing in robotics, motion, electrification and automation technology.

Before that, he held management positions with FrieslandCampina, Refresco, SIG Combibloc and other firms. He has an MBA from Edinburgh Management School and a degree in international marketing from Cooperate State University in Schwenningen, Germany.

Dave Garlow, the outgoing CEO, resigned effective September 1. He was with Viega for 20 years in various roles. Under his leadership, Viega grew significantly in the North American market by accelerating the adoption of pressing technology. He will help ensure a smooth transition to Markus’s leadership. Dave said the thing he will miss most is the people and friendships in the industry.

“My decision to leave Viega now is made easier knowing that I’m leaving it in excellent hands. Markus has the skills and drive to ensure Viega’s continued growth and success,” Dave said.

Contractors, Suppliers Team Up with FEMA, Army Corps to Transform Chicago Convention Center into COVID-19 Field Hospital

As the coronavirus pandemic flared up around the country, the U.S. Army Corps of Engineers rapidly built alternative care facilities to alleviate strain on local hospitals—and MCAA member contractors and manufacturer/supplier partners were there to help. In Chicago, Ferguson, Bradford White, Laars, and Sloan all provided needed materials in record time, and Helm Group (formerly Mechanical, Inc.) was among those working on the ground nonstop as the HVAC and plumbing contractor for the job. Ferguson; LAARS, a Bradford White Company; and SLOAN are all benefactor sponsors.

LEARN MORE

Looking for More Smart Solutions?

Visit the Smart Solutions Case Studies area of our website! You’ll see how other mechanical contractors found their win-win with productivity-enhancing and cost-saving applications from members of MCAA’s Manufacturer/Supplier Council.

Plus, you’ll find tips and ideas on other ways you and your company can save money and enhance your productivity.

VISIT SMART SOLUTIONS

Find the Latest from Viega and MSUITE in MCAA’s Virtual Trade Show

MCAA’s Virtual Trade Show connects our contractor members with the members of MCAA’s Manufacturer/Supplier Council.

Participating companies highlight and link to new products, product lines, services, solutions or web pages of particular interest. Here are just a few of the recent additions:

Viega
Pressed for time? No Sweat. ProPress copper fittings make secure, flameless connections in 7 seconds or less. Approved for more applications than any other copper press fitting system, it’s what the pros use.

Learn More
FabPro - MCAA Virtual Trade Show

MSUITE
Track. Manage. Share. FabPro is the fabrication industry’s first cloud-based software created by mechanical contractors and proven to meet the needs of the fast-paced, ever-changing construction environment.

Learn More

Need Something Else?

Find many more smart solutions in MCAA’s Virtual Trade Show!

Visit the Virtual Trade Show

Speaking of Smart Solutions

Visit the Smart Solutions Case Studies area of our website to learn how other mechanical contractors found their win-win with cost-saving and productivity-enhancing applications from members of MCAA’s Manufacturer/Supplier Council.

This section of our website also includes tips and ideas to help your company save money and enhance your productivity. Don’t miss it!

VISIT SMART SOLUTIONS

Thank You for Supporting Your Foundation

Please join us in saying thank you to the MCAA members who have given to the John R. Gentille Foundation (JRGF) in 2020. Their support enables the JRGF to identify and work to solve the issues that confront the organized mechanical construction and service industry, challenges such as future workforce, productivity and technology.

Your peers supporting these vital efforts in 2020 are:

  • Arden Engineering Constructors, LLC
  • Binsky & Snyder, LLC
  • CCI Mechanical, Inc.
  • CFI Mechanical, Inc.
  • Cleveland Plumbing Industry Promotional and Education Fund
  • CPMCA
  • Dynamics Systems, Inc.
  • Eastern Iowa/Western Illinois MCA
  • Ferguson
  • Harrell-Fish, Inc.
  • Hughes Environmental Engineering, Inc.
  • John W Danforth Company
  • JPG Plumbing & Mechanical Services, Inc.
  • Kinetics Systems, Inc. – (Bill Bianco Scholarship)
  • MCA of Akron, Ohio, Inc.
  • MCA of Greater Springfield, Missouri
  • MCA of Indiana, Inc.
  • MCA of Kansas City
  • MCA of Northwestern Ohio, Inc.
  • MCA of Rockford, Inc.
  • MCA/MSCA of New York, Inc.
  • McCauley Mechanical Construction, Inc.
  • Mechanical Contracting Industry Fund of Cleveland
  • Michael F. Russo
  • Mid-Atlantic MCA
  • Nooter Construction Company
  • North Mechanical Contracting, Inc.
  • Piping and Service Industry Coalition
  • Poole & Kent Corporation
  • Service Fitters Industry Promotional Fund of New York
  • The John F. Gallagher Company
  • West Chester Mechanical Contractors
  • Western New York Association of Plumbing & Mechanical Contractors, Inc.

Learn more and donate on the JRGF website.

Treasury Department Issues Guidance on Payroll Tax Deferral

By: Jim Paretti, Michael J. Lotito, and William Hays Weissman
August 31, 2020

On August 28, 2020, the U.S. Department of the Treasury issued guidance for employers with respect to the deferral of the employee portion of certain payroll taxes.  This guidance stems from a presidential memorandum issued earlier in the month authorizing employers to defer payment of these taxes.  That memorandum allowed for the deferral of the employee portion of federal payroll taxes (6.2% for Social Security and 1.45% for Medicare) from September 1, 2020 until December 31, 2020.  The memorandum allows employers to defer payment of the employee portion of these payroll taxes for workers earning less than $4,000 on a biweekly basis (roughly $104,000 annually). 

Treasury’s guidance makes clear that an employer may elect to defer the payment of the employee portion of these taxes on “applicable wages” until next year, when they would be owed in installments between January 1, 2021 and April 30, 2021.  “Applicable wages” are defined as those wages paid to an employee on pay dates between September 1, 2020 and December 31, 2020, “but only if the amount of such wages or compensation paid for a bi-weekly pay period is less than the threshold amount of $4,000 or the equivalent threshold amount with respect to other pay periods.”  The guidance specifies that applicable wages are determined on a pay period by pay period basis.  Finally, the guidance makes clear that employers are required to pay these taxes to the federal government, but goes on to state that employers “may make arrangements to otherwise collect the [due taxes] from the employee.”

The guidance leaves several clear takeaways.  First, it is clear that an employer is permitted to defer payment of these taxes, but is not required to.  Second, it is likewise clear that unless further action is taken (likely by Congress), these taxes are merely deferred, not forgiven, and will be due by the end of April 2021.  Finally, it is not clear what, if any, role an individual employee plays with respect to determining whether they want their share of these taxes deferred, or paid in the normal course.  Employers will want to keep each of these points in mind as they evaluate whether or not to participate in this elective deferral.

It is unclear whether Treasury will issue additional guidance regarding this program.  Littler WPI will keep you apprised of relevant developments.

PCA’s Virtual Education Series Has Officially Started!

We recognize that virtual events simply cannot replace our in-person educational conferences and networking opportunities, so MCAA has combined several approaches and techniques to create the PCA Virtual Education Series hosted by JPG Plumbing & Mechanical Service, Inc. This year, MCAA attendees will be able to virtually walk through JPG Plumbing & Mechanical Service’s operations through seven workstations as representatives speak about the various aspects.

Once a week, for seven weeks, JPG Plumbing & Mechanical Service will highlight one of the seven workstations through a 15-minute video, followed by a 45-minute discussion of operational costs and Q&A between attendees around the country with similar operations in their companies.

The first module highlights the commercial plumbing service vehicle itself. In the video, JPG Plumbing & Mechanical Service covers the type of vehicle, the equipment and tools on each vehicle and why/how they wrap it with advertising. Each attendee will receive a comprehensive list of the tools mentioned, as well as a link to the manufacturer website and an MSRP. The video will be followed with an open discussion between attendees on how they spec a vehicle or vehicle type differently and what tools they use. By the end of the module, attendees will have a much more thorough understanding of the cost to put a plumbing service truck on the road.

VIEW BROCHURE

Although it is hard to match the insight and knowledge that attendees receive from connecting with peers and networking, MCAA believes this approach is certain to provide greater detail and information for our members, as if one were in the JPG Plumbing & Mechanical Service facility themselves. You can still register – don’t miss out!

REGISTER NOW

Need to Evaluate Your Company’s Ergonomics Program? Check Out this New Safety Resource

MCAA believes that ergonomics should be a standard part of every company’s overall safety program. Recently MCAA partnered with The Center for Construction Research and Training (CPWR), Washington University in St. Louis, and Best Built Plans to develop and record a webinar on Creating a Contractor Ergonomics Program to Reduce Soft Tissue Injuries Among Construction Workers. The webinar is ideal for helping viewers understand the vital components of a successful ergonomics program, and why the components are so vital.

LEARN MORE

New Virtual Education Series on Plumbing Service Gets Out From Behind The Desk and Explores Operations

The PCA announced the opening of a new Virtual Education Series today that goes beyond the typical Zoom meeting that we have become accustomed to.  The seven-episode series features an in-depth look at JPG Plumbing & Mechanical Services, a member contractor based in Jessup, MD.  Each episode is a mini case study in a different area of operations and hosted by the JPG employees in charge of the relevant work.

What makes this series different than a typical webinar is that each area of focus includes a 15-minute video to showcase the operation, a workbook that includes products, materials and costs as well as an interactive interview with the host to get more insight into functions and share attendee solutions.

“We were all set to do a similar conference on plumbing service in person,” JPG President and CEO John Geiling stated.  “When COVID hit, instead of cancelling it or doing it via a PowerPoint presentation, we decided to try to figure out how to expand out the content and share even more information.  The result is that instead of a 15 minute demo that we would have done in our shop, we can get into a lot more details, share more information and get insight from other members as to how their operations are different.”

Beginning on Wednesday, September 23 the series will host a live module each week until its conclusion on November 4.  Each Wednesday, the session materials will be posted with a link to the live episode posted upon its completion.  Materials will be available throughout the duration of the series.  The schedule includes:

  1. Wednesday September 23, 1:00 PM EDT – The Plumbing Service Vehicle – From Tools to Truck
  2. Wednesday September 30, 1:00 PM EDT – Dispatch, GPS, Fleet Vehicle Tracking and Mobile App
  3. Wednesday October 7, 1:00 PM EDT – Technician Training and Recruiting
  4. Wednesday October 14, 1:00 PM EDT – Water Heater Repair and Installation
  5. Wednesday October 21, 1:00 PM EDT – Commercial Drain and Sewer Services
  6. Wednesday October 28, 1:00 PM EDT – Video Inspection/Robotic Pipe Inspection
  7. Wednesday November 4, 1:00 PM EST – Vac Services

Registration for the series is $400 and open to PCA, MCAA and MSCA members only.

To learn more, visit the PCA Virtual Education Series Site.

Support for the series is brought to you by MCAA’s Sponsoring Benefactors.

STOP USE! Miller MightEvac & MightyLite SRLs

Honeywell has issued an Immediate Stop USE Notice for certain models of Miller MightEvac and MightyLite self-retracting lifelines (SRLs) manufactured within a specific time frame. The notice only affects specifically listed models, with identified manufacturing dates or re-certification dates between October 27, 2016 and October 6, 2018. Models outside of this date range, including new units, are not affected by this notice. If your company uses these SRLs check Table 1 in the attached notice to determine whether your SRLs are affected. If so, they should be removed from service immediately. Honeywell is making arrangements for their return and replacement. That information is forthcoming.

LEARN MORE

Donnelly Mechanical Team Plays Key Role in Two NYC Field Hospitals

During the height of the COVID-19 crisis in New York City in April, MCAA member Donnelly Mechanical was an integral part of converting two facilities within Queens and Brooklyn into temporary field hospitals. These hospitals were staffed with doctors and nurses from around the country who traveled to New York to help treat COVID-19 patients and to relieve the burden from the nearby, overtaxed hospitals.

Following a fast-paced, intense, competitive vetting process, Donnelly Mechanical was contracted by SLS Construction to install oxygen lines at the Billie Jean King National Tennis Center in Queens. Based in Galveston, Texas, SLS Construction provides general contracting and construction management services with a specialty in aiding disaster relief efforts. Within just a few days, the combined effort between SLS and Donnelly converted a dozen indoor tennis courts into a temporary overflow hospital with 450 additional beds.

Once the hospital was up and running, Donnelly returned to the site to assist with additional work. Fully functional ventilators require high-pressure oxygen that meets precise specifications. Donnelly’s service team ran high pressure oxygen tubes to the ventilator location in Ward 1, where many COVID-19 patients were being treated. The team took every possible safety precaution, including the use of proper personal protective equipment (PPE) and HAZMAT suits.

Quality Work Leads to Second Project

The GC was thoroughly impressed by Donnelly’s work and quickly awarded them a similar conversion project at the Brooklyn Cruise Terminal. Work to install oxygen lines at the 750-bed facility started immediately.

Teams of 25-30 men worked very long shifts to successfully complete the conversion in five days.

Unsung Heroes Recognized

The dedication of an incredible group of service technicians and field supervisors from Donnelly’s HVAC Service Team played a crucial role in the emergency response to the COVID-19 pandemic in New York City.

The team members involved in those projects were:

  • Doug Abramowitz
  • John Battles
  • Aleko Bode
  • Eddie Buffington
  • Raphy Caba
  • Daniel Carranza
  • Domenico Cecere
  • Vladislav Ceselka
  • Cameron Clarke
  • Stephen Croteau
  • Eliasaph Dorilas
  • William Duffy
  • Nick Feliciano
  • Brandon Fernandez
  • Robert Flynn
  • Kevin Gaertner
  • Ivan Grigorov
  • Richard Harker
  • Christopher Hartley
  • Luis Hoyos
  • Luis Joseph
  • John Keaveney
  • Delano King
  • Everett Kinsler
  • Jeremy Klink
  • Robert Lagomarsine
  • Nekeb (Chad) Laurencin
  • Aleksandar Lazic
  • James LeCrichia
  • Joseph Lopez
  • James Lovett
  • John Mangino
  • James Mansfield
  • Timothy Meyers
  • Bryan Montesino
  • Antonio Mota
  • Arnold Padarath
  • Gavin Petersen
  • George Petersen
  • Endri Prifti
  • Felix Rivera
  • Nicholas Rizoglou
  • Thomas Rogoz
  • Miguel Sambolin
  • Angel Santiago
  • Paul Sehlmeyer
  • Rejnaldo Shehi
  • Mitram Singh
  • Rajendra Singh
  • Christopher Soto
  • Cedric Spencer
  • Anthony Tartaglia
  • Henry Taveras
  • Lester Tom
  • Kevin Torres
  • Aaron Vanterpool
  • David Warner
  • Stanley Young

MCAA thanks the Donnelly team and all of our members who have worked tirelessly to protect their communities’ safety. We’re all in this together.

Find the Latest from Watts Water Technologies and DEWALT Industrial Tool Company in MCAA’s Virtual Trade Show

MCAA’s Virtual Trade Show connects our contractor members with the members of MCAA’s Manufacturer/Supplier Council.

Participating companies highlight and link to new products, product lines, services, solutions or web pages of particular interest. Here are just a few of the recent additions:

Watts Water Technologies
Get the job done Pronto!™ Now available in Cast Iron as well as PVC, this dual adjustable floor drain from Watts® provides maximum efficiency and accuracy during installation. Designed for post-pour adjustment with flexibility in mind, Pronto! key product features save contractors time and labor costs.

Learn More

DEWALT Industrial Tool Company
DEWALT®, the leading manufacturer of power tools, hand tools, accessories and storage solutions, announces that its new ToughSystem® 2.0 Storage System, which offers improved durability and modularity versus previous units, is now available.

Learn More

Need Something Else?

Find many more smart solutions in MCAA’s Virtual Trade Show!

Visit the Virtual Trade Show

Speaking of Smart Solutions

Visit the Smart Solutions Case Studies area of our website to learn how other mechanical contractors found their win-win with cost-saving and productivity-enhancing applications from members of MCAA’s Manufacturer/Supplier Council.

This section of our website also includes tips and ideas to help your company save money and enhance your productivity. Don’t miss it!

VISIT SMART SOLUTIONS

American Bar Association Publication Highlights Loss of Productivity Methodologies

The American Bar Association (ABA) published an in depth article by Paul Stynchcomb, CCM, PSP, CFCC, Professor William Ibbs, PhD and James Newland, Esquire in the Summer 2020 edition of The Construction Lawyer. The authors dissect recent Civilian Board of Contract Appeals cases in which three MCAA member firms received substantial compensation for losses in labor productivity using a variety of quantification methodologies, including the MCAA Factors, the MCAA overtime inefficiency tables and the measured mile method.

The article titled “Preparing and Presenting Loss of Labor Productivity Claims: Analysis of the Methodologies with Two Exemplars,” is the most recent in the quarterly publication, which contains some of the most pertinent articles on contracts, recent court decisions and construction law to be found anywhere in the industry. Some of the construction industry’s most acclaimed attorneys and experts publish articles that have a direct bearing on the construction industry.

In the current COVID-19 environment, many contractors are seeking recovery of loss of labor productivity and are looking for methods of productivity impact quantification specific to the effects of the pandemic. All of the well tested methods applied to the two exemplar cases described in the article are applicable to quantifying COVID-19 impacts. 

This ABA article, coupled with the MCAA’s series of informative webinars on quantifying losses in labor productivity, including those caused by the COVID-19 pandemic, provide a valuable training tool for MCAA member firms attempting to quantify and recover losses in labor productivity.

Related Webinars:

The following webinars are available as part of MCAA COVID-19 Contingency Plan Webinar Series.

Related Resource:

MCAA’s GreatFutures Virtual Fall Program Finishes Week 2

MCAA’s GreatFutures Virtual Fall Program has kicked off! Each of the 17 presentations is meant to help students navigate the proposal and bid process for the annual MCAA Student Chapter Competition project.  

Did we mention registration is free and you only have to register once for ALL of the presentations!

Once registered, you will receive a confirmation email with the MCAA’s GreatFutures Virtual Fall Program website login instructions. This website includes:

  • All virtual program details;
  • Presentation descriptions;
  • Speaker overviews; and 
  • A full agenda with links to join the live sessions!

We encourage you to attend as many presentations live to interact with fellow students and engage with the presenters in the presentation Q&A. If you are unable to attend any of the sessions live, don’t you worry, the recorded presentations will be posted on MCAA’s GreatFutures Virtual Fall Program website AFTER the live session.

MCAA is sending a weekly Monday reminder email to registered attendees, highlighting the presentations for that week. Don’t forget to add them to your calendar!

MCAA’s GreatFutures Virtual Fall Program is sponsored by

REGISTER NOW

The MCAA Family Is Growing

The MCAA family is growing, with more and more companies seeing the value of MCAA membership in ensuring their productivity and profitability. Please join us in welcoming the newest members of the MCAA family.

Contractor Members

All Trades Distribution
Bensalem, PA

Beaumont Mechanical Contractors, Inc.
Lake Grove, NY

Big Apple Piping Inc.
Sound Beach, NY

Big Pipe Mechanical LLC
Brentwood, CA

BIM Designs, Inc.
Aurora, CO

Blue Bear Plumbing
Marshfield, MA

Christopherson Plumbing
Omaha, NE

City Brewery
La Crosse, WI

Colombo Sales and Engineering Inc.
Oakley, MI

Craft Mechanical LLC
Chicago, IL

DeLong Plumbing Two, Inc.
Springfield, MO

D.A. Dodd, LLC
Rolling Prairie, IN

DR Specialties
Grand Junction, CO

Emcon Services, Inc.
Peachtree City, GA

Flo-Tron Contracting, Inc.
Hunt Valley, MD

Franco Belli Plumbing & Heating & Sons, Inc.
Brooklyn, NY

Fluid Mechanical, LLC
Kennard, NE

G&G Mechanical Inc.
Lancaster, CA

General & Mechanical Services, LLC
Annapolis, MD

GJM Engineering, Inc.
Los Angeles, CA

Graycon, Inc.
City of Industry, CA

Harris Bay Area, LLC
Brisbane, CA

Herrman & Goetz, Inc.
South Bend, IN

IPC Lydon
Sayreville, NJ

Industrial Resourcing Group
St. Marys, OH

Jersey Mechanical Contractors, Inc.
Farmingdale, NJ

Keystone Fabrication, LLC
Mt. Pleasant, PA

Dorvin D. Leis Co., Inc.
Kahului, Maui, HI

Robert L. Kistler Service Corp.
Rochester, NY

Maylon Enterprises, LLC
Gambier, OH

Mel-Kay Electric Company, Inc. dba Mel-Kay Mechanical Company, Inc.
Evansville, IN

Metro Mechanical Colorado LLC
Arvada, CO

Midstate Plumbing & Heating Inc.
Fort Dodge, IA

MK Industries, Inc.
Vernon Hills, IL

F.E. Moran, Inc. Refrigeration
Lemont, IL

Northstar Refrigeration
Plymouth, MA

Ochoa Mechanical Group, LLC
Chicago, IL

O’Connor Plumbing Company
Oak Hills, CA

On Point HVAC Corp.
Ozone Park, NY

Owens Companies
Minneapolis, MN

Perrysburg Plumbing, Heating & Air Conditioning, LLC
Perrysburg, OH

Peterman Plumbing & Heating, Inc.
Dover, OH

Preferred Mechanical, Inc.
Bronx, NY

Prime Specialty Contracting, LLC dba Prime Mechanical Contracting
Marquette, MI

Redstar Mechanical, Inc.
Fort Lee, NJ

Rivera Equipment dba Valley Industrial Mechanical
Oak Hills, CA

S & L Plumbing and Heating Corp.
White Plains, NY

Schadegg Mechanical
South St Paul, MN

Service2.0
Monroe, MI

Solutions Mechanical LLC
Aurora, CO

Traina Mechanical, Inc.
Metairie, LA

TRS Mechanical
Spanaway, WA

Uhl Company, Inc.
Maple Grove, MN

United Plumbing & Mechanical, Inc.
Woodhaven, NY

United States Mechanical, Inc.
Circle Pines, MN

Manufacturer/Supplier Members

Lochinvar, LLC
Lebanon, TN

Procore Technologies, Inc.
Carpinteria, CA

Raken
Carlsbad, CA

Ridge Tool Company
Elyria, OH

SF&P Advisors
Boca Raton, FL

Sioux Chief Manufacturing Company, Inc.
Kansas City, MO

Sunbelt Rentals, Inc.
Fort Mill, SC

MCAA PAC Appreciates Your Support

Throughout the COVID-19 pandemic, the MCAA Government Affairs Committee has been working tirelessly meeting with countless Congressional and Senate offices remotely to push our agenda forward. This vital work was made possible by PAC contributions to candidates who support our positions over the long term. Please join us in thanking those who gave and consider making a contribution to support these vital efforts.

The Government Affairs Committee’s legislative and advocacy work on issues like COVID-19 cost increases on Federal projects, change orders in the NDAA, pension issues, and the PBGC just to mention a few was made possible by:

  • Robert Beck
  • Robert Bolton
  • Tim Brink
  • Michael Cables
  • Don Chase
  • Jay Chase
  • Matthew Cunningham
  • Steve Dawson
  • Jim Dougherty
  • Charles Fell
  • Lyle Ferguson
  • John Feikema
  • John Ferrucci
  • Steve Fosdick
  • Greg Fuller
  • James Gaffney
  • Michael Gallagher
  • John Geiling
  • Don Giarratano
  • Jason Gordon
  • Brian Helm
  • Scott Hinton
  • Brian Hughes
  • Jay Lusita
  • William Lynch
  • Mark Magnuson
  • Rick Moreno
  • Edward Newville
  • David Quirk
  • Mark Rogers
  • Bob Snyder Jr.
  • Lawrence Verne
  • Frank Wall
  • Scott Wallenstein

MCAA’s 2020 advocacy efforts continue to need your help. Contribute to the MCAA PAC, a critical factor to our success in moving forward legislation that positively affects your business.

(Note: In order to comply with campaign finance laws, you will need to complete a solicitation authorization form before making a contribution. Find additional details and both the solicitation authorization and contribution forms via the button below.)

Contribute

Law Office of Adele Abrams Newsletter – August 20, 2020

MCAA partner Adele Abrams has released the Law Office of Adele Abrams Newsletter dated August 20, 2020. The latest newsleter includes articles on OSHA Use of NWS Chart for Heat Stress Invalidated and Updates Affecting Marijuana in the Workplace.