The Next Qualified Level Arc Flash Safety Training Webinars Scheduled for July 23, 2020

June 22, 2020

Make sure your service techs have the up-to-date safety training they need to protect themselves from arc flash and electrical shock hazards while working on equipment pushing 480 volts or less. The session covers all applicable OSHA requirements, NFPA 70E provisions, best practices, and real-world accident information.

VIEW BROCHURE

The next two training webinars will be presented on July 23, 2020. The first webinar will take place from 7:00 a.m. to 9:00 a.m. EST, and the second is from 10:00 a.m. to 12:00 p.m. EST.

REGISTER TODAY

Take advantage of the MCAA/MSCA member discounted webinar prices below.

PRICING:

# of Trainees (per company)Cost (per person)
1-5$200/person
6-10$175/person
11-25$150/person
26-50$125/person
51-100$ 100/person
101+Email for Pricing

If you can’t make it in July, the webinar will be taught again twice on August 20, 2020.

Questions? Contact Pete Chaney.

Related Articles
Make sure your service techs have the up-to-date safety training they need to protect themselves from arc flash and electrical shock hazards while working on equipment pushing 480 volts or less. The session covers all applicable OSHA requirements, NFPA 70E provisions, best practices, and real-world accident information.…
NFPA 70E is the industry consensus standard for electrical safety in the workplace. It is part of the National Electrical Codes, and it is revised by the National Fire Protection Association every three years. The most current version is NFPA 70E - 2021. Parts of the standard help us protect our service technicians from electrical shock and arc flash hazards. One of the provisions in the standard calls for affected employers to establish an electrical safety in the workplace program. MCAA has updated its Model Electrical Safety in the Workplace Program. The model program, which addresses work on mechanical equipment pushing 480 volts or less, was recently revised to make it consistent with NFPA 70E - 2021.…
Each week, MCAA will highlight one or more of the educational resources that are free to MCAA members as a benefit of membership. This week, we focus on MCAA’s Aerial Lift Safety Training Video, an easy way to help meet Occupational Safety and Health Administration (OSHA) and American National Standards Institute (ANSI) A92 aerial lift safety training requirements.…
Fluke is recalling certain models of clamp meters that could be hazardous to the users. …

MCAA’s GreatFutures Virtual Fall Program kicks off tomorrow, September 15. Each of the 17 presentations is meant to help guide students through the proposal and bid process for the annual MCAA Student Chapter Competition project. Don't forget to register! http://ow.ly/w63v50BqCSg

MCAA is excited to announce REGISTRATION IS OPEN for the PCA Virtual Education Series! This year, attendees will virtually walk through seven workstations at JPG Plumbing & Mechanical Service, Inc. as representatives speak about the various aspects. http://ow.ly/DHGK50Bgm0C

Register today for MCAA’s GreatFutures Virtual Fall Program starting September 15 through November 17! Each presentation is meant to help students navigate the proposal and bid process for the annual Student Chapter Competition project. http://ow.ly/TPMN50BfM7N

Registration is open for MCAA’s GreatFutures Fall Virtual Program! From September 15 through November 17, MCAA will host 17 presentations aimed at guiding our student chapters through creating a bid for the annual MCAA Student Chapter Competition project. http://ow.ly/mfbe50B7SZd

Load More...