The Work Practices in this Guide Help You Break the Line Safely

October 3, 2019

Safe work practices can be the difference between a safe line break and an extremely hazardous situation. MCAA’s latest guide will help you benchmark your practices and protect your workers.

Inside, you’ll find information about:

  • Common line breaking hazards
  • The most likely injuries from improper line breaking operations
  • Common causes of line breaking incidents
  • General line breaking preparations
  • A checklist you can use to ensure that line breaking is done consistently

By using these tools and educating your workers, you can ensure that every line break is a safe one.

DOWNLOAD
Related Articles
Make sure your service techs have the up-to-date safety training they need to protect themselves from arc flash and electrical shock hazards while working on equipment pushing 480 volts or less. The session covers all applicable OSHA requirements, NFPA 70E provisions, best practices, and real-world accident information.…
OSHA recently issued new guidance on how to use workplace ventilation systems to reduce exposures to the coronavirus, including efficiency targets for air filters and recommendations for fan use. The guidance calls for employers to install HVAC filters with minimum efficiency reporting value ratings of “13 or higher, where feasible,” and to “consider using” high-efficiency particulate air fan and filtration systems, “especially in higher-risk areas.”…
MCAA's long-time partner in workplace safety, loss control, and risk control is sharing it's Risk Control e-Talks series on Business Resiliency with MCAA members. The series addresses how natural and manmade catastrophes, pandemics, and civil unrest create uncertainty, complexity, and challenges that unfold in real time.…
Explore our industry’s most important safety issues while you connect with fellow MCAA members and our UA partners at MCAA’s 18th Annual Safety Directors’ Conference. The conference will be presented online on January 19, and 20, 2021. The program features a wide variety of safety education, plus an exhibit. MCAA thanks CNA and Milwaukee Tool for sponsoring the conference. …

MCAA’s GreatFutures Virtual Fall Program kicks off tomorrow, September 15. Each of the 17 presentations is meant to help guide students through the proposal and bid process for the annual MCAA Student Chapter Competition project. Don't forget to register! http://ow.ly/w63v50BqCSg

MCAA is excited to announce REGISTRATION IS OPEN for the PCA Virtual Education Series! This year, attendees will virtually walk through seven workstations at JPG Plumbing & Mechanical Service, Inc. as representatives speak about the various aspects. http://ow.ly/DHGK50Bgm0C

Register today for MCAA’s GreatFutures Virtual Fall Program starting September 15 through November 17! Each presentation is meant to help students navigate the proposal and bid process for the annual Student Chapter Competition project. http://ow.ly/TPMN50BfM7N

Registration is open for MCAA’s GreatFutures Fall Virtual Program! From September 15 through November 17, MCAA will host 17 presentations aimed at guiding our student chapters through creating a bid for the annual MCAA Student Chapter Competition project. http://ow.ly/mfbe50B7SZd

Load More...