3M™ PROTECTA® Rebel Self Retracting Lifelines – Pre-Use Inspections Required

September 14, 2020

A limited number of 3M™ PROTECTA® Rebel Self Retracting Lifelines produced between October 14, 2019 and February 25, 2020 may have a manufacturing issue. However, the issue can be easily detected through a pre-use inspection described in detail by 3M. If after carefully following 3M’s pre-use inspection instructions the SRLs are not working properly, take them out of service immediately, and contact the 3M customer service department at 1-800-328-61446 or by e-mail at 3musfpserviceaction@mmm.com.

LEARN MORE

Related Articles
NFPA 70E is the industry consensus standard for electrical safety in the workplace. It is part of the National Electrical Codes, and it is revised by the National Fire Protection Association every three years. The most current version is NFPA 70E - 2021. Parts of the standard help us protect our service technicians from electrical shock and arc flash hazards. One of the provisions in the standard calls for affected employers to establish a lockout/tagout program that is specific to electrical safety. MCAA's Model Lockout/Tagout Program for Electrical Safety, which addresses work on mechanical equipment pushing 480 volts or less, was recently revised to make it consistent with NFPA 70E - 2021.…
The National Maintenance Agreements Policy Committee (NMAPC) is now accepting online applications for its 21st Annual Zero Injury Safety Awards® (ZISA®), which will recognize zero-injury achievements in calendar year 2020. ZISA® celebrates the efforts of industrial business owners/clients, union contractors and building trades in achieving world-class safety performance on their projects. To be eligible, projects must be completed under the terms of the National Maintenance Agreement.…
Make sure your service techs have the up-to-date safety training they need to protect themselves from arc flash and electrical shock hazards while working on equipment pushing 480 volts or less. The session covers all applicable OSHA requirements, NFPA 70E provisions, best practices, and real-world accident information.…
NFPA 70E is the industry consensus standard for electrical safety in the workplace. It is part of the National Electrical Codes, and it is revised by the National Fire Protection Association every three years. The most current version is NFPA 70E - 2021. Parts of the standard help us protect our service technicians from electrical shock and arc flash hazards. One of the provisions in the standard calls for affected employers to establish an electrical safety in the workplace program. MCAA has updated its Model Electrical Safety in the Workplace Program. The model program, which addresses work on mechanical equipment pushing 480 volts or less, was recently revised to make it consistent with NFPA 70E - 2021.…

MCAA’s GreatFutures Virtual Fall Program kicks off tomorrow, September 15. Each of the 17 presentations is meant to help guide students through the proposal and bid process for the annual MCAA Student Chapter Competition project. Don't forget to register! http://ow.ly/w63v50BqCSg

MCAA is excited to announce REGISTRATION IS OPEN for the PCA Virtual Education Series! This year, attendees will virtually walk through seven workstations at JPG Plumbing & Mechanical Service, Inc. as representatives speak about the various aspects. http://ow.ly/DHGK50Bgm0C

Register today for MCAA’s GreatFutures Virtual Fall Program starting September 15 through November 17! Each presentation is meant to help students navigate the proposal and bid process for the annual Student Chapter Competition project. http://ow.ly/TPMN50BfM7N

Registration is open for MCAA’s GreatFutures Fall Virtual Program! From September 15 through November 17, MCAA will host 17 presentations aimed at guiding our student chapters through creating a bid for the annual MCAA Student Chapter Competition project. http://ow.ly/mfbe50B7SZd

Load More...