Organization: MCAA

The Next Qualified Level Arc Flash Safety Training Webinars Scheduled for June 17, 2021

Make sure your service techs have the up-to-date safety training they need to protect themselves from arc flash and electrical shock hazards while working on equipment pushing 480 volts or less. The session covers all applicable OSHA requirements, NFPA 70E provisions, best practices, and real-world accident information.

VIEW BROCHURE

The next two webinars will be presented on June 17, 2021. The first webinar will take place from 7:00 a.m. – 9:00 a.m. ET, and the second is from 10:00 a.m. – 12:00 p.m. ET.

REGISTER TODAY

Take advantage of the MCAA/MSCA member discounted webinar prices below.

PRICING:

# of Trainees (per company)Cost (per person)
1-5$200/person
6-10$175/person
11-25$150/person
26-50$125/person
51-100$100/person
101+Email for Pricing

If you can’t make it in June, the webinar will be taught again twice on July 29, 2021. Questions? Contact Pete Chaney.

Milwaukee Valve Pros Explain How to Check Your Check Valves

Depending on the application, check valves can get a bad rap. They are blamed for problems such as water hammer, vibration, reverse flow, leakage, or component wear and damage—all of which are harmful to downstream systems. However, the real cause of these problems usually stems from poor sizing and inadequate selection of the check valve for the application.

LEARN MORE

Looking for More Smart Solutions?

Visit the Smart Solutions Case Studies area of our website! You’ll see how other mechanical contractors found their win-win with productivity-enhancing and cost-saving applications from members of MCAA’s Manufacturer/Supplier Council.

Plus, you’ll find tips and ideas on other ways you and your company can save money and enhance your productivity.

VISIT SMART SOLUTIONS

MCAA Partners with Dodge Data & Analytics To Study Jobsite Safety

MCAA, the Center for Construction Research and Training (CPWR), and other organizations are partnering with Dodge Data & Analytics on a study of jobsite safety. The study will track trends in U.S. construction industry safety practices, and MCAA members are encouraged to participate. The survey will close on June 23, 2021.

The survey should take approximately 12 minutes to complete. MCAA members who submit completed surveys will have the option to receive a summary report of the survey findings emailed to them.

Your survey responses are strictly confidential and will not be associated with your name or the name of your company in any way. Your responses will be combined with others and only presented as averages or percentages, or by visual means that cannot be linked back to individual answers. Your responses will be stored in a password protected database that can only be accessed by analysts at Dodge Data & Analytics.

SURVEY

Resource Highlight: MCAA’s Fire Safety Training Video & Accompanying Materials

Each week, MCAA will highlight one or more of the educational resources that are free to MCAA members as a benefit of membership. This week, we focus on MCAA’s Fire Safety Training Video and its materials. This video will teach your workers to recognize common causes of jobsite fires and how to prevent them.

Your workers will learn about:

  • Health effects of smoke inhalation and burns
  • Common causes of jobsite fires
  • Proper fire prevention techniques
  • Safe fire response, including knowing when to fight the fire and when to get out and leave it to the professionals

The video comes with a pocket guide that highlights key training points, a training documentation sheet, a 20-question multiple choice test, and a test answer key.

Download the Video and Accompanying Materials

Video | Pocket Guide | Documentation Sheet | Test | Answer Key

Have Questions or Need Personal Assistance?

Contact MCAA’s Pete Chaney.

Connect With the Latest Training from SPX Cooling Technologies, Inc. and FastEST, Inc. at MCAA.org

The Manufacturer/Supplier Training area of MCAA’s website connects our contractor members with training opportunities available from the members of MCAA’s Manufacturer/Supplier Council.

Participating companies highlight and link to new webinars and training opportunities across their product lines, services, solutions or web pages. Here are just a few of the recent additions:

SPX Cooling Technologies, Inc.
Looking to tune up your evaporative cooling knowledge? SPX Marley Contractor Resources include live and on-demand webinars, School of Cool® training, installation videos and more. Check it out.

Learn More

FastEST, Inc.
Included with every purchase or lease, FastEST Estimating Software provides online training with one of our experienced team members. Our customer service team is available 24/7 for training and any support you may need! For those who are wanting a more in-depth and hands on training experience, we are hopeful that by mid-year we will start our regional training classes back up. In the meantime please visit our website and the help section of our program for tutorial videos.

Learn More

Interested in More Training from Our Supplier Partners?

Be sure to visit the Manufacturer/Supplier Training area for all the latest offerings.

Learn More

Celebrate Resilience & Hope TOGETHER

As we come together for this year’s MSCA Conference we will celebrate a year of resilience, perseverance, and hope. Our Opening Session speaker J.R. Martinez, a U.S. Army veteran who was wounded during his service, will remind us that resilience shows up in the world in many ways. His inspiring message of hope, optimism, and resilience will demonstrate that a combination of gratitude for what we have and a commitment to reaching for what we want, despite current circumstances, are the building blocks for a better tomorrow.

MSCA’s Everyday Hero Award recognizes others who are building a better tomorrow…our industry’s unsung heroes. These individuals do extraordinary things every day, simply out of the kindness of their hearts. If this sounds like someone you know, nominate them for the award. Be sure to submit your nomination by August 1, 2021.

NOMINATION FORM

We look forward to seeing you at this year’s conference!
October 14 – 17 | Scottsdale, AZ

MCAA 2026 Annual Convention

The MCAA Annual Convention is the highlight of the association’s year. With a reputation as the industry’s premier educational event, the MCAA Convention offers something for all members. Attendees will experience a first class trade show featuring the members of MCAA’s Manufacturer/Supplier Council, social functions that never cease to amaze and delight, exceptional education seminars and the chance to network and connect with industry peers. Don’t miss the opportunity to see what your trade association can do for you.

MCAA 2028 Annual Convention

The MCAA Annual Convention is the highlight of the association’s year. With a reputation as the industry’s premier educational event, the MCAA Convention offers something for all members. Attendees will experience a first class trade show featuring the members of MCAA’s Manufacturer/Supplier Council, social functions that never cease to amaze and delight, exceptional education seminars and the chance to network and connect with industry peers. Don’t miss the opportunity to see what your trade association can do for you.

MCAA 2024 Annual Convention

The MCAA Annual Convention is the highlight of the association’s year. With a reputation as the industry’s premier educational event, the MCAA Convention offers something for all members. Attendees will experience a first class trade show featuring the members of MCAA’s Manufacturer/Supplier Council, social functions that never cease to amaze and delight, exceptional education seminars and the chance to network and connect with industry peers. Don’t miss the opportunity to see what your trade association can do for you.

Find the Latest from Jay R. Smith Mfg. Co.® and GTP Services, LLC in MCAA’s Virtual Trade Show

MCAA’s Virtual Trade Show connects our contractor members with the members of MCAA’s Manufacturer/Supplier Council.

Participating companies highlight and link to new products, product lines, services, solutions or web pages of particular interest. Here are just a few of the recent additions:

Jay R. Smith Mfg. Co.® a Member of Morris Group International
Water hammer arresters control the destructive forces, pounding noises and vibration which develop in a piping system when a column of non-compressible liquid flowing through a pipe line is stopped abruptly. Smith’s piston type water hammer can be used in residential, commercial, and industrial applications. They are made from lead free copper and rated for 60 PSI.

Learn More

GTP Services, LLC
STRATUS, the premiere Virtual Design and Construction Productivity software solution for MEP Contractors, takes you beyond the model. Elevate your technology capabilities in the shop and field. Empower your team with information. Encourage more communication and engagement.

Learn More

Need Something Else?

Find many more smart solutions in MCAA’s Virtual Trade Show!

Visit the Virtual Trade Show

Speaking of Smart Solutions

Visit the Smart Solutions Case Studies area of our website to learn how other mechanical contractors found their win-win with cost-saving and productivity-enhancing applications from members of MCAA’s Manufacturer/Supplier Council.

This section of our website also includes tips and ideas to help your company save money and enhance your productivity. Don’t miss it!

VISIT SMART SOLUTIONS

OSHA Suspends Recordkeeping Enforcement of Adverse Reactions to Employer Mandated COVID-19 Vaccinations

MCAA reported previously that if your company requires a worker to get vaccinated and that worker has an adverse reaction to the vaccine, and the results of the adverse reaction meet the criteria for an OSHA recordable injury (medical treatment beyond first aid, days away from work, etc.), OSHA considers the case to be “work-related,” and employers are required to treat the case as a “recordable illness.”

The DOL, OSHA, and other federal agencies, are working diligently to encourage COVID-19 vaccinations. OSHA does not wish to discourage workers from receiving the COVID-19 vaccination, or disincentivize employers’ vaccination efforts. As a result, OSHA will not enforce 29 CFR 1904’s recording requirements to require any employers to record worker side effects from COVID-19 vaccination through May 2022. The agency will reevaluate the agency’s position at that time to determine the best course of action moving forward.

Are Vaccinated Workers Exempt From COVID-19 Infection Control Measures?

OSHA is reviewing recent CDC guidance and will update their website accordingly. However, until those updates are completed, the agency is referring affected employers to the “CDC guidance for information on measures appropriate to protect fully vaccinated workers.” The highlights of the guidance published by the CDC follow.

If you’ve been fully vaccinated:

  • You can resume activities that you did prior to the pandemic.
  • You can resume activities without wearing a mask or staying 6 feet apart, except where required by federal, state, local, tribal, or territorial laws, rules, and regulations, including local business and workplace guidance.
  • If you travel in the United States, you do not need to get tested before or after travel, or self-quarantine after travel.
  • If you’ve been around someone who has COVID-19, you do not need to stay away from others or get tested unless you have symptoms.
  • You should still watch out for symptoms of COVID-19, especially if you’ve been around someone who is sick. If you have symptoms of COVID-19, you should get tested and stay home and away from others.
  • People who have a condition or are taking medications that weaken the immune system, should talk to their healthcare provider to discuss their activities. They may need to keep taking all precautions to prevent COVID-19.

LEARN MORE

New Report Shows MCAA Members Lead in Technology Innovation, Lag in IT Budgeting

A new report provides MCAA members with a mechanical industry specific look at how MCAA members are using construction technology. The report, developed by JBKnowledge, is based on the 2020 Construction Technology Report released in March.

The 2020 Construction Technology Report provides an in-depth analysis of how the industry approaches technology based on thousands of responses from those in all areas of the construction industry, including MCAA members.

The new 2020 Supplementary Report for MCAA Members narrows the focus to MCAA members, comparing MCAA member responses with the rest of the construction industry.

In many ways, MCAA members are leading the rest of the industry in technology innovations. This can be seen in the use of fabrication and mobile devices, and the integration of construction apps and Virtual Design and Construction (VDC). Technology implementation and coordination have given many MCAA members a chance to take a leading role in the coordination and design of projects.

One area of that mechanical and plumbing contractors could use more help on is information technology (IT) budgeting. Compared to the rest of the industry, MCAA members tend to bill IT expenditures directly to jobs less often. They also require a greater budgetary commitment for their crucial IT workflows to positively impact productivity.

Both reports can be downloaded by MCAA members for free:

MCAA Supplementary Report

2020 JBKnowledge Construction Technology Report

Questions about either report, or anything else related to the Construction Technology Initiative, can be directed to Sean McGuire.

Lexington Plumbing Locks In Savings, Energy Efficiency With Lochinvar Systems

To provide an energy-efficient system for a Kansas county jail, Lexington Plumbing employed Lochinvar’s exclusive SMART SYSTEM interface to simplify installation and operation of two new Lochinvar ARMOR water heaters. “We consistently recommend Lochinvar equipment because of their constant innovations and technologically advanced systems,” said Don Lawhon of Lexington Plumbing.

LEARN MORE

Looking for More Smart Solutions?

Visit the Smart Solutions Case Studies area of our website! You’ll see how other mechanical contractors found their win-win with productivity-enhancing and cost-saving applications from members of MCAA’s Manufacturer/Supplier Council.

Plus, you’ll find tips and ideas on other ways you and your company can save money and enhance your productivity.

VISIT SMART SOLUTIONS

Sponsor Spotlight 21 Welcomes Mark Marini from Jay R. Smith Mfg. Co.®

In the 21st episode of MCAA’s Sponsor Spotlight series, Rick Gopffarth, MCAA’s Vice President/Assistant Treasurer welcomes Mark Marini, VP – Morris Group International for Jay R. Smith Mfg. Co.®. The Sponsor Spotlight Series is a new way for MCAA contractor members to learn more about the Manufacturer/Supplier Council (M/SC) Governing Board members, their products, their relationship with MCAA, and what being a member means to them.

Mark Marini is Morris Group International, Inc. (MGI) Group Vice President since June 2020. Don Morris CEO of (MGI) elevated Mark to his VP role, to blend the resources of the various MGI companies into a cohesive suite of plumbing and fire protection product solutions. Working closely with Jay R Smith Mfg. Inc. we strive to have best in class inventories closest to our customers as well as true manufacturing at our Montgomery, AL facility reducing lead times and controlling quality.  Mark joined Morris Group International, Inc. in 2018 as Director of Sales and Marketing for Chronomite Laboratories, Inc. Prior to joining Morris Group International Inc., Mark worked for Zurn Industries starting in 2000. While at Zurn he worked in various sales roles to include; National Sales Manager for Specification Drains, Director of Contractor Sales, and prior to his departure in 2018 he was Director of Sales. Mark has been active in MCAA since 2008 and enjoys adding value for Contractor partners. Mark has a Bachelor of Science degree in Marketing from Penn State University.

Resource Highlight: MCAA’s Inspecting Materials Handling Equipment Safety Training Video & Accompanying Materials

Each week, MCAA will highlight one or more of the educational resources that are free to MCAA members as a benefit of membership. This week, we focus on MCAA’s Inspecting Materials Handling Equipment Safety Training Video and its materials. Damaged and defective materials handling equipment can be hazardous. Protect your workers by ensuring they receive proper training with these resources.

The video includes:

  • Tips for pre-use inspections
  • Specific recommendations for inspecting jacks, forklifts and other types of lifts, hoists, cranes, and rigging equipment

The video comes with a pocket guide that highlights key training points, a training documentation sheet, a 20-question multiple choice test, and a test answer key.

Download the Video and Accompanying Materials

Video | Video – Spanish | Pocket Guide | Documentation Sheet | Test | Answer Key

You Might Also Like These Resources

Have Questions or Need Personal Assistance?

Contact MCAA’s Pete Chaney.

Guess What? We’re Back! The 2021 GreatFutures Forum Will Be In-Person & In Scottsdale, Arizona!

We heard you. We know you’re eager to get together with other students and with contractors from around the country. And, honestly, we can’t wait to see you, too!

So, we thought, let’s not wait. Let’s all come together. And what better place than in conjunction with the highly anticipated, in-person MSCA21 Conference this October. Students and contractors can meet, inspire, hire, share ideas, and generally have a great time. 

Here’s where we’ll meet:

JW Marriott Scottsdale Camelback Inn Resort & Spa
October 17-19, 2021

Here’s what you’ll get to do:

  • Meet with contractors at general sessions, receptions, and pretty much everywhere you go.
  • Get to know the industry and its people, and start forging relationships.
  • Let the industry know you and your talents at the GreatFutures Forum Job Fair.
  • Gain further insight and direction regarding this year’s Student Chapter Competition. (Don’t worry, the project will be announced virtually in September!)

As schools reopen, the country reconnects, and the mechanical contracting industry reunites, you can get the jump on building your great future.

Registration will open next month, so keep an eye out for more information. For now, though, start looking ahead…It’ll be great to be together, at last! 

If you have any questions, please reach out to Megan Walsh.

Mask Mandates Are Falling – What Are Employers To Do?

On May 13, 2021 the CDC unexpectedly recommended that, with limited exceptions, fully vaccinated individuals can resume all indoor and outdoor activities without wearing masks or social distancing, except where required by law or workplace guidance. In response to the confusion created by differing State and Federal guidelines, Lindabury, McCormick, Estabrook & Cooper, P.C. has prepared an overview for employers so they can create policies for addressing the vaccination status of their employees.

Department of Labor Issues Cybersecurity Best Practices for ERISA-Covered Plans

ERISA-covered plans often hold millions of dollars or more in assets and maintain personal data on participants, which can make them tempting targets for cyber-criminals. Responsible plan fiduciaries have an obligation to ensure proper mitigation of cybersecurity risks. The Employee Benefits Security Administration has prepared the following best practices for use by recordkeepers and other service providers responsible for plan-related IT systems and data, and for plan fiduciaries making prudent decisions on the service providers they should hire. 

MCAA Sponsor Spotlight 21: Mark Marini, Jay R. Smith Mfg. Co.®

In the 21st episode of MCAA’s Sponsor Spotlight series, Rick Gopffarth, MCAA’s Vice President/Assistant Treasurer welcomes Mark Marini, VP – Morris Group International for Jay R. Smith Mfg. Co.®. The Sponsor Spotlight Series is a new way for MCAA contractor members to learn more about the Manufacturer/Supplier Council (M/SC) Governing Board members, their products, their relationship with MCAA, and what being a member means to them.

Mark Marini is Morris Group International, Inc. (MGI) Group Vice President since June 2020. Don Morris CEO of (MGI) elevated Mark to his VP role, to blend the resources of the various MGI companies into a cohesive suite of plumbing and fire protection product solutions. Working closely with Jay R Smith Mfg. Inc. we strive to have best in class inventories closest to our customers as well as true manufacturing at our Montgomery, AL facility reducing lead times and controlling quality.  Mark joined Morris Group International, Inc. in 2018 as Director of Sales and Marketing for Chronomite Laboratories, Inc. Prior to joining Morris Group International Inc., Mark worked for Zurn Industries starting in 2000. While at Zurn he worked in various sales roles to include; National Sales Manager for Specification Drains, Director of Contractor Sales, and prior to his departure in 2018 he was Director of Sales. Mark has been active in MCAA since 2008 and enjoys adding value for Contractor partners. Mark has a Bachelor of Science degree in Marketing from Penn State University.

Friday, June 4, 2021 | 2:00 p.m. EST