P1 Group, Inc. Recognized for Safety Excellence

October 14, 2020
Don Campbell, Vice President; Greg Sweeney, Safety Director; and Kollin Knox, President of P1 Group, Inc. with their award.

MCAA and CNA are pleased to announce that P1 Group, Inc. earned the association’s top safety award for 2019 in Size Category 5, More Than 1 Million Work Hours. P1’s successful “Why Not Zero” campaign set the company apart.

P1 presented employees with a single small goal: going accident free as a company one day at a time. Each morning started with the same small goal presented during a Daily Safety Checklist. The goal was further reinforced in safety training sessions and on employee T-shirts with the Why Not Zero logo.

The MCAA/CNA Safety Excellence Awards Program began in the 1990s when MCAA partnered with CNA Insurance. It is a fiercely competitive program in which only the best of the best compete for the awards.

Participants are required to describe their safety programs in detail, including how they achieved safety excellence and why they believe they deserve the award. The Safety Awards Selection Taskforce, which is led by CNA, carefully evaluates each submission looking for safety leadership, an advanced safety culture, effective leading indicators of safety performance, and innovative safety initiatives that helped the company achieve an exceptionally high degree of safety excellence.

MCAA and CNA congratulate P1 Group for earning such a high degree of safety excellence in 2019.

Related Articles
Make sure your service techs have the up-to-date safety training they need to protect themselves from arc flash and electrical shock hazards while working on equipment pushing 480 volts or less. The session covers all applicable OSHA requirements, NFPA 70E provisions, best practices, and real-world accident information.…
MCAA and CNA are pleased to announce that Postler & Jaeckle Corporation earned the association’s top safety award for 2019 in Size Category 4, 450,001 – 1 Million Work Hours. Postler & Jaeckle’s successful Service Specific Safety Committee set the company apart.…
MCAA, in conjunction with the UA, recently led the development of a new American National Standards Institute (ANSI) industry consensus standard on pressure testing safety. The new standard, ANSI/ASSP A10.35 Safety Requirements for Pressure Testing Steel and Copper Piping Systems, was published on October 16, 2020.…
“Negligent entrustment” can stem from employees driving company-owned vehicles, their personal vehicles, or other vehicles on company business. Employers have a responsibility to know if an employee has something in his or her driving background that creates a risk to others. Negligent entrustment implies a company knew or should have known that it put an unsafe driver behind the wheel of a vehicle and allowed that employee to drive on behalf of the company. (CNA is an MCAA benefactor sponsor.)…

In the inaugural episode of MCAA’s Sponsor Spotlight series on Friday, October 30 at 2 p.m. Eastern, MCAA CEO, Tim Brink, welcomes Bill Hughes, Executive Vice President, End User Solutions for MILWAUKEE TOOL and Chair of the Manufacturer/Supplier Council.

http://ow.ly/RwJg50C1elT

Great video of a flying factory. I'm curious how they dissemble the hoisting shed afterwards, but the safety and productivity gains are easily seen.

Twitter feed video.Great video of a flying factory.  I'm curious how they dissemble the hoisting shed afterwards, but the safety and productivity gains are easily seen.
BAM Construct UK@BAMConstructUK

Zalmhaven - Using a flying factory and precast elements to construct the Benelux regions tallest residential building #offsite #innovation

Schedules are tight and conferences aren't in-person this year, but that can't be an excuse not taking the time to learn about new ideas and innovation. There is still time to register for @procoretech Groundbreak this year. Hope to see you there.

Groundbreak 2020 - Construction Technology Conference

Join us for our first virtual Groundbreak this Fall.

www.procore.com

Scan to BIM (to Fab?) Either way, I can watch these videos on a loop.

Twitter feed video.Scan to BIM (to Fab?) Either way, I can watch these videos on a loop.
WmTSpaeder@wmtspaeder

#3Dscanning creates #pointclouds that provide precise as-built measurements. One use of these point clouds is for a modeling reference as seen here in the timelapse. #wmtspaeder #vdc

Load More...