Murphy Company Interns Get Project Experience on Their College Campus

June 15, 2020

Murphy Company interns Jacob Reed and Morgan Hanley have been onsite project engineering interns for the University of Missouri-Columbia’s NextGen Precision Health Institute. The opportunity has given them a first-hand look at what it takes to build a job on their college campus. 

About the Project

The company continues its work on the facility which supports a systemwide precision health initiative aimed at harnessing and supporting the research activities of its four universities and health system. The building will include lab space for current and new faculty, graduate students, clinicians and have collaborative spaces for work with industry partners.

The facility is the largest single project that the University of Missouri has ever undertaken. The project consists of a new 265,000 sq. ft. six story facility.

The Murphy Company team, in collaboration with their general contractor and trade partners, was hired on in a design-assist capacity completed the following extensive BIM and fabrication on this past year:

  • Identified and corrected 1,134 BIM clashes prior to installation
  • Fabricated 121,000 lbs. of ductwork and 65,000 lbs. of mechanical piping and racks
  • Installed the following:
    • 7,600 Linear Feet (LF) of underground piping
    • 22,500 MEP Trimble points based on BIM
    • 41,700 LF of above ground plumbing and piping
    • 3,4000 of LF of reverse osmosis (RO) piping
    • 21,640 LF of copper process piping

Construction on the institute is expected to be completed in October 2021.

Both Jacob Reed and Morgan Hanley began their internships in Murphy Company’s St. Louis office this past spring semester.  

About Jacob

Jacob is entering his senior year at the University of Missouri-Columbia, studying Mechanical Engineering. In the spring working 20-hour week, Jacob was able to see the project manager role in action by attending coordination meetings, daily site walks and reviewing construction drawings making him more familiar with the project layout. Since the spring Jacob has transition to a full-time intern this summer.

“Since I have transitioned to full-time for the summer, I feel that I am gaining valuable real-world experience without too much of an internship feel. My responsibilities now include reviewing submittals, tracking productivity, and the commissioning process of equipment. I have been able to soak in as much information as possible, ask plenty of questions about topics I did not fully understand, and have real responsibilities that add value to the work being completed here. I believe it is the perfect balance that is allowing me to apply my skills and develop new ones.”

Jacob looks forward to the rest of his summer internship and continue to learn from Murphy employees the importance of coordination, communication, and critical problem solving.

“I have now seen multiple times how project managers are able to take a problem in stride, communicate with co-workers to create a solution, and implement that solution in a timely manner. I am also looking forward to watching further completion of the NextGen Precision Health Institute. I find it very exciting that I get to see firsthand the construction of a multi-million-dollar research institute at my college.”

About Morgan

Morgan Hanley is a Junior at the University of Missouri-Columbia studying chemical engineering. In the spring Morgan was on-site at the NextGen facility and this summer is currently working in Murphy Company’s engineering department.

“I’ve really enjoyed my time so far with Murphy as it has allowed me to apply what I have learned in my coursework to practical, real-world scenarios. I have enjoyed being able to see two pieces of a bigger puzzle at work. Being on site of NextGen and then coming to the Engineering department has been really interesting because it has closed the loop between the drawings and plans I worked with at Mizzou to how those intricate details, sizings, and selections are determined during the design phase. It has been fascinating to observe the complementary aspects of both locations, and I am excited to learn even more during the rest of the summer.”

Start Your Search for Top Talent Today

Find student chapter members like Derrick by visiting MCAAGreatFutures.org, where members have access to student profiles and resumes. The profiles are searchable by university, desired location, and even a specific skill set, like BIM or AutoCAD. A keyword filter allows users to zero in on students who fit the bill.

Related Articles
The student chapter at Ball State University proudly nominated Dr. Sherif Attallah to be MCAA’s 2020 Educator of the Year because they believed he is more than qualified and deserving of this prestigious award, and MCAA’s Career Development Committee agreed. Here’s why.…
MCAA is so excited that our Virtual Education Conference (VEC) is almost here! Next week starts off with MCAA’s Annual Student Chapter Competition on Monday, March 22nd from 12:30 p.m. - 2:30 p.m. ET and you will not want to miss it. Congratulations to our final four teams – Fairleigh Dickinson University, Kansas State University, Missouri State University and Virginia Tech, Blacksburg Campus. Get to know the final four teams before the big competition!…
MCAA was proud to have the opportunity to spotlight so many women in our industry this week on our social media channels in celebration of Women in Construction Week. Here's a recap of just some of the amazing talent that we have in our industry, in case you missed it!…
Ed Kommers, Executive Director of the MCA of Western Washington (MCAWW) announced that MCAWW Associate Director Robin Cowper was elected Chair of the local union-management apprenticeship (JATC) committee. She is the first woman chair and the first association executive to hold that position locally.…

Some of the SWAG arrived for the MEP Innovation Conference already. For those participating in the @TrimbleMEP social event on Monday, this nerdy custom Glencairn glass is one of your choices.

With the construction process adopting digital workflows, it's important to understand the impact on your business, including productivity gains & time saved due to new tools. MCAA’s 2021 MEP Innovations Conference, April 26-28, does just that! http://ow.ly/kZy250El2vQ

Tauhira Ali is more than a speaker at MEP Innovation Conference this year. She is helping to coordinate the conference from a NECA perspective with breakout sessions, roundtables and participation. Great speaker, better peer. https://www.mcaa.org/events/calendar/2021-mep-innovation-conference/

Load More...