Share Your Insights on Fabrication and Modular Construction

October 24, 2019

MCAA has partnered with Dodge Data & Analytics on an important study on the use of fabrication and modular construction, and we hope you will participate. Your response is essential to helping us understand the types of fabrication and modular construction currently being done in the U.S., the benefits and challenges of these approaches, and the drivers and obstacles for greater use. This, in turn, enables us to provide the right education to keep you ahead of your competition.

As a thank you for taking the survey, you can choose to receive the Prefabrication and Modular Construction SmartMarket Report based on the study’s findings. There’s no cost to you, and the survey should only take about 10 minutes to complete.

We will be sharing an in-depth presentation on the study results at next year’s Fabrication Conference, hosted by the Baker Group, May 11-13, 2020.

Thank you for participating in this effort.

TAKE THE SURVEY
Related Articles
JBKnowledge has partnered with the MCAA Construction Technology Initiative to update the HoloLens research report to include new features and updates released with the upgraded HoloLens 2. Join us on February 4th at 1:00 PM Eastern as we present the report findings and demonstrate some of the functions. …
The best way to understand your company’s technology challenges is to understand your processes. For years, workflow tools like MCAA’s Successful Project Management Flowchart have helped contractors understand baseline methodologies related to project management. MCAA’s new Successful VDC Management Flowchart adds to your toolbox by incorporating the application of fabrication, BIM and Virtual Design and Construction (VDC) processes into the project workflow.…
Manufacturing has increased output through robotics, lean principles, digitization and automation. This has been hard to translate directly to the construction industry because every building, project and system is unique. In the second session of MCAA’s Fabrication Virtual Mini series, we are focusing on North Mechanical, an Indiana-based contractor that performs plumbing, mechanical and service. …
In a hyper-connected world, the ability to get connectivity to the jobsite is absolutely critical, especially now! Join MCAA’s Virtual Education Conference, March 22-25, 2021, and hear how to stay connected from James Benham, CEO of JBKnowledge.…

Can augmented reality be used on a jobsite? Join MCAA & JBKnowledge for a webinar on February 4th at 1pm ET to learn about the 2020 Microsoft HoloLens research findings, including use cases that can be applied with the XR10. Save your seat today at http://ow.ly/1Ji750Dg1lJ

Tune in on Friday, January, 29 at 2 p.m. Eastern for MCAA’s Sponsor Spotlight #10 with Armand Kilijian and David Weir, Director, Sales National Accounts for Uponor. Register today at http://ow.ly/Lpc650CIf99

2020 was tough and we all needed support from those around us. Did an Educator or Faculty Advisor mentor you throughout the challenging year? If so, share your appreciation by nominating them to receive MCAA’s 2020 Educator of the Year Award. http://ow.ly/uj9y50DeY4t

Did your student chapter have any graduates in 2020? Has your student chapter welcomed new members? Perhaps your student chapter has a new president or faculty advisor. Please email MCAA’s Director of Career Development, Megan Walsh, with your Student Chapter transitions.

Load More...