Three NEW NCPWB Webinar Resources on Piping Codes, ASME Code Welding Requirements & Internal Oxidation with Walter Sperko

April 15, 2021

Piping Codes and Welding for Mechanical Contracting Managers

There are key aspects about pipe welding that Project Managers and supervisors must understand in order to be sure that welds their company makes are suitable for service and meet contract and Code requirements. Despite the idea that codes are difficult to meet, when properly understood and followed, they can protect a contractor from unreasonable demands by owners and their engineers. Knowing what codes cover allows managers to identify unusual and costly requirements in customer specifications. Understanding what goes on in assembling and welding pipe joints illustrates the importance of performing inspections at critical steps. Codes impose radiography or ultrasonic examinations and customers frequently add additional requirements and knowing how to manage those requirements on a project can make or break a job.

VIEW RESOURCE

Internal Oxidation for Piping Welds

When welding stainless steel and nickel alloy piping using an open root or consumable insert, the root side of the joint (i.e., the inside surface of the pipe at a weld) must be protected from the oxygen in the atmosphere, otherwise the liquid weld metal will oxidize badly creating a surface that is not only discolored but is also quite rough. This roughness and discoloration will reduce the corrosion resistance of the metal at the weld.  In this webinar you will learn what is acceptable level of discoloration of the root side of the stainless-steel pipe weld and provides general guidance on the level of root surface discoloration that can be tolerated for some service conditions

VIEW RESOURCE

The Easy Way to Meet ASME Code Welding Requirements

A contractor has liability when contracts specify meeting ASME B31 Codes. When it comes to welding procedures and welder qualification, meeting those requirements can be challenging. Those responsibilities can be met easily as members of the NCPWB by following a few simple rules that will be explained during this presentation.

VIEW RESOURCE

About the Presenter

Walter J. Sperko is president of Sperko Engineering Services, Inc. in Greensboro, N.C.  The firm provides engineering consulting services to customers in the metal fabrication industries in welding, metallurgy, manufacturing processes, piping and pressure vessel design, inspection and quality assurance. The firm also prepares and conducts training programs in ASME Section IX, piping, welding and metallurgy, as well as custom-tailored programs related to metal fabrication. Prior to his consulting business, Sperko was with RECO North Carolina, Inc. (Colfax, N.C.), ITT Grinnell Industrial Piping, Inc. (Kernersville, N.C.) and Ebasco Services, Inc. (New York, N.Y.).

Related Articles
A Technical Bulletin just issued by the National Certified Pipe Welding Bureau (NCPWB) addresses significant changes made in ASME Section IX, 2021 edition, that are of interest to mechanical contractors and piping fabricators. Opinions expressed in this article are Mr. Sperko’s, not the official opinion of ASME BPV Standards Committee IX. These changes become mandatory for new qualifications January 1, 2022. …
Each week, MCAA will highlight one or more of the educational resources that are free to MCAA members as a benefit of membership. This week, we focus on Tools to Reduce the Cost and Risk Associated with Welding and Brazing. This resource highlights the many ways that the National Certified Pipe Welding Bureau (NCPWB) keeps contractors informed about welding and brazing technology, and simplifies welding and brazing qualification practices.…
The NCPWB is offering three free webinars to all NCPWB/MCAA/MSCA contractors, as well as UA members on a wide range of topics related to welding, including piping codes and welding for mechanical contracting managers, the easy way to meet ASME code welding requirements, and internal oxidation for piping welds. The three webinars will all take place on April 19, 2021. Register today!…
Are you planning to solder in a couple of dozen 1-1/2 inch brass control valves in that heating system you are installing in that high-rise building?…

Tomorrow we'll be live with part two in our VDC Webinar Mini-Series: Using @TrimbleMEP SysQue® and Connect2Fab. @MCAAGeek will be your host – hit the link to register now!
https://mcaa.org/news/vdc-webinar-mini-series-using-trimble-sysque-and-connect2fab/

EMCOR Services-Betlem recommended @LochinvarLLC ‘s XRGI®25 combined heat and power system, integrated with a new KNIGHT® boiler system for a college's boiler upgrade. The new cogeneration system creates energy as it works.

http://ow.ly/bhFC50H4kQG

Registration is open for the 2022 MEP Innovation Conference!
Register now to join us Jan. 24-26 in Tamp, FL to network with peers from across multiple trades to learn their practices and advances in the industry.
Click here for more info and to register >> https://www.mcaaevents.org/itc/

Load More...