Webinar #26: Using the MCAA’s Publication to Quantify CV-19 Loss of Labor Productivity on Your Project

August 4, 2020
There is no question the ongoing COVID-19 pandemic has impacted the construction and service jobsite productivity. In this expanded webinar John McNerney, Paul Stynchcomb, CCM, PSP, CFCC and Professor William Ibbs, Ph.D. of The Ibbs Consulting Group discuss MCAA’s newly updated Change Orders, Productivity, Overtime manual, and how to use the manual to quantify a loss of productivity (LoP) impact caused by COVID-19.

There is no question the ongoing COVID-19 pandemic has impacted the construction and service jobsite productivity. In this expanded webinar John McNerney, Paul Stynchcomb, CCM, PSP, CFCC and Professor William Ibbs, Ph.D. of The Ibbs Consulting Group discuss MCAA’s newly updated Change Orders, Productivity, Overtime manual, and how to use the manual to quantify a loss of productivity (LoP) impact caused by COVID-19. Being one of the most difficult processes, our panelists will guide you through the nuts and bolts of how to craft an LoP claim and the need for construction counsel to review contracts, government guidelines and current regulations. This webinar explores the project-specific LoP quantification methods and reviews which of the MCAA Factor categories are potentially applicable to the COVID-19 LoP impacts.

Additional Resources:

Editor’s note: The slides available for download contain the most recent and up-to-date calculations originally released in the MCAA’s Change Orders, Productivity, Overtime manual and corrects slide #40 in this webinar, recorded Tuesday, August 4, 2020.

Related Articles
In the fifteenth episode of MCAA’s Sponsor Spotlight series, MCAA CEO, Tim Brink is joined by Jon Howland, Marketing Director, Stanley Black & Decker, Inc. …
In the sixteenth episode of MCAA’s Sponsor Spotlight series, Brian Helm, MCAA President is joined by Gary Moore, Victaulic Executive Vice President. Join us on March 12, 2021 at 2:00 p.m. EST.…
NFPA 70E is the industry consensus standard for electrical safety in the workplace. It is part of the National Electrical Codes, and it is revised by the National Fire Protection Association every three years. The most current version is NFPA 70E - 2021. Parts of the standard help us protect our service technicians from electrical shock and arc flash hazards. One of the provisions in the standard calls for affected employers to establish a lockout/tagout program that is specific to electrical safety. MCAA's Model Lockout/Tagout Program for Electrical Safety, which addresses work on mechanical equipment pushing 480 volts or less, was recently revised to make it consistent with NFPA 70E - 2021.…
Each week, MCAA will highlight one or more of the educational resources that are free to MCAA members as a benefit of membership. This week, we focus on the Project Manager’s Manual. This manual covers all aspects of mechanical industry project management, including key topics like managing change orders and claims, job cost and labor control, productivity, scheduling, safety and much more. In addition to guidance, explanation, and best practices, it includes templates and examples of commonly used forms and documents like a Short Interval Schedule.…

MCAA’s GreatFutures Virtual Fall Program kicks off tomorrow, September 15. Each of the 17 presentations is meant to help guide students through the proposal and bid process for the annual MCAA Student Chapter Competition project. Don't forget to register! http://ow.ly/w63v50BqCSg

MCAA is excited to announce REGISTRATION IS OPEN for the PCA Virtual Education Series! This year, attendees will virtually walk through seven workstations at JPG Plumbing & Mechanical Service, Inc. as representatives speak about the various aspects. http://ow.ly/DHGK50Bgm0C

Register today for MCAA’s GreatFutures Virtual Fall Program starting September 15 through November 17! Each presentation is meant to help students navigate the proposal and bid process for the annual Student Chapter Competition project. http://ow.ly/TPMN50BfM7N

Registration is open for MCAA’s GreatFutures Fall Virtual Program! From September 15 through November 17, MCAA will host 17 presentations aimed at guiding our student chapters through creating a bid for the annual MCAA Student Chapter Competition project. http://ow.ly/mfbe50B7SZd

Load More...