Post COVID-19 Vaccine Jobsite Safety Guidelines

April 19, 2021

According to the CDC, COVID-19 vaccines are safe and effective. Some individuals may experience side effects, but they are typically short lived. For the most part, the benefits of the vaccine far outweigh the short lived side effects. With more Americans receiving the vaccines every day it is important to start planning for the post vaccine era. These guidelines are intended to help you do just that, but it is likely that they will change several times over the coming months, so please continuously watch for updates from MCAA.   

What We Do NOT Know About the Vaccines

There is still much that we do not know about the vaccines, so even fully vaccinated individuals need to follow COVID-19 safety protocol while working just about anywhere. Here is why:

  • We do not know whether the vaccines keep vaccinated individuals from spreading the virus;
  • We do not know how long the vaccine protects vaccinated individuals against the virus; and
  • We do not know how effective the vaccines are against variants of the virus.

Fully Vaccinated Individuals

An individual is “fully vaccinated” when he or she has had both doses of the Pfizer or Moderna vaccines, or a single dose of the Johnson & Johnson vaccine, AND two full weeks have passed since the last injection.

Fully Vaccinated Individuals at Work

Fully vaccinated employees on jobsites, in fabrication shops, in office buildings and in other public areas performing regular duties that do not require specialized or additional personal protective equipment should:

  • Wear a two-ply face covering that completely covers the nose and mouth;
  • Practice proper hand hygiene by frequently washing hands and/or using hand sanitizers; and
  • Maintain a social distance of at least 6 feet from all other individuals.

When social distancing requirements must be suspended, such as when two workers are needed for the safe manual handling of materials, the affected workers should continue to wear their face coverings, don face shields, wear work gloves, and limit the amount of time they will be working together closer than 6 feet to less than 15 minutes.

Employers

Affected employers should:

  • Require all employees to comply with the protocol;
  • Enforce employee compliance with the protocol; and
  • Ensure that routine environmental cleaning is performed on affected surfaces at least once daily and more frequently when needed.

More frequent cleaning or disinfection should be performed if/when:

  • There is a high transmission of COVID-19 in or around a workplace;
  • The workplace is in an area where people are not wearing masks;
  • The frequency and/or quality of hand hygiene is inadequate for any reason; and/or
  • Individuals with increased risk of severe illness from COVID-19 are working in the area.

Fully Vaccinated Individuals Not Working

Once fully vaccinated, individuals outside the workplace can start to do some of the things that have not been acceptable since the pandemic began, such as:

  • Visit inside a home or private setting without a mask with fully vaccinated people of any age;  
  • Visit inside a home or private setting without a mask with one household of unvaccinated people who are not at risk for severe illness;
  • Travel domestically without a pre-or post-travel test;
  • Travel domestically without quarantining after travel;
  • Travel internationally without a pre-travel test depending on the destination; and
  • Travel internationally without quarantining after travel.

GUIDELINES PDF

Related Articles
OSHA recently updated their guidelines on mitigating and preventing the spread of COVID-19 in the workplace, which reflects the July 27, 2021 Centers for Disease Control and Prevention (CDC) mask and testing recommendations for fully vaccinated people.…
Each week, MCAA will highlight one or more of the educational resources that are free to MCAA members as a benefit of membership. This week, we focus on MCAA’s new safety training video, Master the Mechanics: Hand & Power Tool Safety for the Mechanical Trades. The video provides trainees with information on the most common hand and power tool injuries in the mechanical construction and service trades. It highlights the tools most likely to be involved in an injury incident, and teaches proper use of the tools to help prevent injuries.…
MCAA extends a warm welcome to Raffi Elchemmas, who will be joining the staff starting August 2, 2021. He will be MCAA’s new Executive Director of Safety, Health and Risk Management, learning the ropes before Pete's upcoming retirement. Raffi comes to us from Milwaukee Tool, where he was the National Manager, Health & Safety. He is a board-certified ergonomist with an MBA in Sales Leadership & Health Sector Management from DePaul University. He has been a member of MCAA’s Safety and Health Committee since 2019. MCAA is pleased to welcome Raffi to the staff, and his wife Martha, daughter Nina, and son Vartan to the MCAA staff family.…
STIHL is recalling to repair certain TS 410 and TS 420 cut-off machines manufactured between January 2021 and April 2021. In some of these machines the flywheel can break apart while the engine is running, posing a projectile hazard to the users or bystanders. If you have any of these machines, immediately discontinue use and take them to an authorized STIHL dealer for free repair. …

MCAA’s GreatFutures Virtual Fall Program kicks off tomorrow, September 15. Each of the 17 presentations is meant to help guide students through the proposal and bid process for the annual MCAA Student Chapter Competition project. Don't forget to register! http://ow.ly/w63v50BqCSg

MCAA is excited to announce REGISTRATION IS OPEN for the PCA Virtual Education Series! This year, attendees will virtually walk through seven workstations at JPG Plumbing & Mechanical Service, Inc. as representatives speak about the various aspects. http://ow.ly/DHGK50Bgm0C

Register today for MCAA’s GreatFutures Virtual Fall Program starting September 15 through November 17! Each presentation is meant to help students navigate the proposal and bid process for the annual Student Chapter Competition project. https://t.co/7aHJmLEgKE

Registration is open for MCAA’s GreatFutures Fall Virtual Program! From September 15 through November 17, MCAA will host 17 presentations aimed at guiding our student chapters through creating a bid for the annual MCAA Student Chapter Competition project. http://ow.ly/mfbe50B7SZd

Load More...