MEP Innovations Conference Goes Beyond BIM – Sessions Geared Towards Fabrication, Project Management and Process

April 9, 2021

Event Dates: April 26 – 28, 2021

MCAA’s 2021 MEP Innovations Conference provides more than just education towards BIM and VDC, it approaches every aspect of your operations that interacts with digital information. With the construction process adopting digital workflows, it is important to understand the impact on your business, including productivity gains and time saved due to new tools.

“There has been a fundamental shift in how construction works today in the movement from paper to data,” Bob Snyder, CEO of Binsky & Snyder says. “You might be able to compete with lower margins and higher risk today by sticking with paper-based processes, but when our company leaned into it and embraced a digital transformation, we started finding that we could do more, communicate better, be safer and work on a wider variety of projects.”

To address this change, the MEP Innovations Conference has sessions on processes beyond BIM and VDC. Breakouts have been developed on topics including fabrication, estimating, project management, safety, operations and service. These sessions focus on solutions for those just getting started, as well as those at the cutting edge.

For example, education geared towards project managers ranges from beginner sessions like Model Viewing 101 for PMs and VDC 101 for PMs, to more advanced topics like Aligning VDC Team with Project Schedules, an Inside Look at a Contractors’ Tech Stack and Managing Change Orders. For people with fabrication focused interests, there are beginner sessions like Fabrication 101 and much more advanced sessions like Increasing Your Spooling Productivity 5x and Going Beyond Paperless which will showcase a contractors’ digital implementation in their fabrication facilities.

All of these new tools and strategies are built on processes. In one of the most important sessions of the conference, North Mechanical’s Rod Foley and MEP Innovation Lab’s Jonathan Marsh talk about how to document processes. Tuesday’s opening general session called Understanding the Process Before Buying the Solution talks about not only the importance of establishing and documenting your process, but how it is important to keep it flexible as new tools are brought in. 

These highlights are just a few of the 100+ sessions at the MEP Innovation Conference. Visit the MEP Innovations Conference website if you would like to learn more and see how many of them can be of value to you and your team. While individual registrations are available for $200, corporate registrations for $400 allow you to register up to 10 people from your company.

REGISTER NOW

Related Articles
Each week, MCAA will highlight one or more of the educational resources that are free to MCAA members as a benefit of membership. This week, we focus on MCAA’s 2021 3D Scanning Technology Research Report. The report assesses various laser, non-laser scanning and photogrammetric hardware and software tools used by mechanical contractors. MCAA members stand to benefit from these and other rapidly evolving technologies that can expedite work, increase precision and prevent mistakes.…
Each week, MCAA will highlight one or more of the educational resources that are free to MCAA members as a benefit of membership. This week, we focus on MCAA’s Cybersecurity Maturity Model Certification (CMMC) Overview. The United States Department of Defense has created the new CMMC standard that will soon be required for corporations and entities that want to bid as a contractor, or act as a subcontractor, for DoD projects. This whitepaper is designed to give electrical and mechanical contractor corporate leadership and their IT Directors an overview of the CMMC standard.…
Each week, MCAA will highlight one or more of the educational resources that are free to MCAA members as a benefit of membership. This week, we focus on MCAA’s revised Management Methods Bulletin on The Next Generation of Data Security. This bulletin is intended to provide guidance and insight of current tools and techniques to protect your data and operations.…
MCAA has once again partnered with JBKnowledge to produce the annual Construction Technology Survey. The 15 minute questionnaire forces respondents to ask themselves if they allocate resources properly, are they staying on top of innovative building trends and if they are using the right tools for their business. The window to take the 2021 Construction Technology Survey is now through mid-July.…

MCAA’s GreatFutures Virtual Fall Program kicks off tomorrow, September 15. Each of the 17 presentations is meant to help guide students through the proposal and bid process for the annual MCAA Student Chapter Competition project. Don't forget to register! http://ow.ly/w63v50BqCSg

MCAA is excited to announce REGISTRATION IS OPEN for the PCA Virtual Education Series! This year, attendees will virtually walk through seven workstations at JPG Plumbing & Mechanical Service, Inc. as representatives speak about the various aspects. http://ow.ly/DHGK50Bgm0C

Register today for MCAA’s GreatFutures Virtual Fall Program starting September 15 through November 17! Each presentation is meant to help students navigate the proposal and bid process for the annual Student Chapter Competition project. https://t.co/7aHJmLEgKE

Registration is open for MCAA’s GreatFutures Fall Virtual Program! From September 15 through November 17, MCAA will host 17 presentations aimed at guiding our student chapters through creating a bid for the annual MCAA Student Chapter Competition project. http://ow.ly/mfbe50B7SZd

Load More...