MCAA & MSCA of Eastern Pennsylvania Present Asbestos Awareness – Part 2 – January 13, 2021 at 12:00 p.m. EST

January 7, 2021

The recent influx of demolition and renovation on 40-plus year-old buildings around the country generates the need for our industry to revisit the construction health issues associated with asbestos exposure. In Part 2 of this multi-part webinar series, Jim Harrity, Compliance Assistance Specialist for OSHA Region III, will address the asbestos hazards that are specific to the mechanical construction and service industry. Register now and join us on Wednesday, January 13, 2021 from 12:00 p.m. to 1:30 p.m. EST.

BROCHURE

REGISTER

Related Articles
NFPA 70E is the industry consensus standard for electrical safety in the workplace. It is part of the National Electrical Codes, and it is revised by the National Fire Protection Association every three years. The most current version is NFPA 70E - 2021. Parts of the standard help us protect our service technicians from electrical shock and arc flash hazards. One of the provisions in the standard calls for affected employers to establish an electrical safety in the workplace program. MCAA has updated its Model Electrical Safety in the Workplace Program. The model program, which addresses work on mechanical equipment pushing 480 volts or less, was recently revised to make it consistent with NFPA 70E - 2021.…
Each week, MCAA will highlight one or more of the educational resources that are free to MCAA members as a benefit of membership. This week, we focus on MCAA’s Aerial Lift Safety Training Video, an easy way to help meet Occupational Safety and Health Administration (OSHA) and American National Standards Institute (ANSI) A92 aerial lift safety training requirements.…
Fluke is recalling certain models of clamp meters that could be hazardous to the users. …
SkyJack, Genie, and possibly other brands of scissors lifts that have been outfitted with load sensors are experiencing problems. While the sensors help the user comply with the recently revised ANSI A92.20 standard's load sensing requirements, the lifts’ new sensor systems allow the user(s) to elevate with an overload and may leave workers stranded at elevation.…

MCAA’s GreatFutures Virtual Fall Program kicks off tomorrow, September 15. Each of the 17 presentations is meant to help guide students through the proposal and bid process for the annual MCAA Student Chapter Competition project. Don't forget to register! http://ow.ly/w63v50BqCSg

MCAA is excited to announce REGISTRATION IS OPEN for the PCA Virtual Education Series! This year, attendees will virtually walk through seven workstations at JPG Plumbing & Mechanical Service, Inc. as representatives speak about the various aspects. http://ow.ly/DHGK50Bgm0C

Register today for MCAA’s GreatFutures Virtual Fall Program starting September 15 through November 17! Each presentation is meant to help students navigate the proposal and bid process for the annual Student Chapter Competition project. http://ow.ly/TPMN50BfM7N

Registration is open for MCAA’s GreatFutures Fall Virtual Program! From September 15 through November 17, MCAA will host 17 presentations aimed at guiding our student chapters through creating a bid for the annual MCAA Student Chapter Competition project. http://ow.ly/mfbe50B7SZd

Load More...