Arden Engineering Constructors Collaborates on COVID-19 Field Hospital

May 1, 2020

Arden Engineering Constructors recently completed work on two COVID-19 field hospitals which add 935 patient beds for the anticipated COVID-19 surge in Rhode Island. The project had two 12-hour shifts running seven days a week from the time it began on April 6 until completion on April 18.

Arden provided and installed all of the HVAC piping, plumbing, ductwork, and medical gas piping for the project. Their in-house fabrication shop created finished bathroom piping systems ready for installation.

Unique Metal Works, an Arden Building Company, fabricated and installed approximately 6,000 feet of spiral exhaust ductwork with connection to plenum to provide “negative air flow” and prevent the escape of possible contamination. Their ability to do this provided both cost efficiencies and greater quality control for the project.

Earthwise Energy Technologies of Arden Building Companies, installed the monitoring and alarming for the negative pressure exhaust systems in the patient and pharmacy areas. The systems are monitored remotely using a graphic interface that allows needed adjustments to be made at any time, from anywhere.

MCAA thanks Arden Engineering Constructors for their efforts in support of healthcare providers, and for providing alternative care facilities for COVID-19 patients.

Related Articles
In the fifteenth episode of MCAA’s Sponsor Spotlight series, MCAA CEO, Tim Brink is joined by Jon Howland, Marketing Director, Stanley Black & Decker, Inc. …
In the sixteenth episode of MCAA’s Sponsor Spotlight series, Brian Helm, MCAA President is joined by Gary Moore, Victaulic Executive Vice President. Join us on March 12, 2021 at 2:00 p.m. EST.…
NFPA 70E is the industry consensus standard for electrical safety in the workplace. It is part of the National Electrical Codes, and it is revised by the National Fire Protection Association every three years. The most current version is NFPA 70E - 2021. Parts of the standard help us protect our service technicians from electrical shock and arc flash hazards. One of the provisions in the standard calls for affected employers to establish a lockout/tagout program that is specific to electrical safety. MCAA's Model Lockout/Tagout Program for Electrical Safety, which addresses work on mechanical equipment pushing 480 volts or less, was recently revised to make it consistent with NFPA 70E - 2021.…
Each week, MCAA will highlight one or more of the educational resources that are free to MCAA members as a benefit of membership. This week, we focus on the Project Manager’s Manual. This manual covers all aspects of mechanical industry project management, including key topics like managing change orders and claims, job cost and labor control, productivity, scheduling, safety and much more. In addition to guidance, explanation, and best practices, it includes templates and examples of commonly used forms and documents like a Short Interval Schedule.…

MCAA’s GreatFutures Virtual Fall Program kicks off tomorrow, September 15. Each of the 17 presentations is meant to help guide students through the proposal and bid process for the annual MCAA Student Chapter Competition project. Don't forget to register!

MCAA is excited to announce REGISTRATION IS OPEN for the PCA Virtual Education Series! This year, attendees will virtually walk through seven workstations at JPG Plumbing & Mechanical Service, Inc. as representatives speak about the various aspects.

Register today for MCAA’s GreatFutures Virtual Fall Program starting September 15 through November 17! Each presentation is meant to help students navigate the proposal and bid process for the annual Student Chapter Competition project.

Registration is open for MCAA’s GreatFutures Fall Virtual Program! From September 15 through November 17, MCAA will host 17 presentations aimed at guiding our student chapters through creating a bid for the annual MCAA Student Chapter Competition project.

Load More...