Acceptable Alternatives to Cloth Face Coverings When Deemed Inappropriate for COVID-19 Protection

June 10, 2020

Where cloth face coverings are not appropriate in the work environment or during certain tasks (e.g., because they could become contaminated or exacerbate heat illness), OSHA allows employers to provide alternative PPE, such as face shields and/or surgical masks.

Like cloth face coverings, surgical masks and face shields can help contain the employee’s potentially infectious respiratory droplets and help limit the spread of COVID-19. Using a face shield in lieu of a cloth face covering can help workers stay cooler in hot climates and reduce the fogging of safety glasses.

If you choose to provide your employees with face shields, it is important they understand the difference between face shields rated for construction tasks (e.g., grinding) and face shields used in the medical industry, which have no built-in impact protection. Most importantly, make sure all your employees have the proper face protection based on the work they will be performing.

Related Articles
OSHA recently updated their guidelines on mitigating and preventing the spread of COVID-19 in the workplace, which reflects the July 27, 2021 Centers for Disease Control and Prevention (CDC) mask and testing recommendations for fully vaccinated people.…
Each week, MCAA will highlight one or more of the educational resources that are free to MCAA members as a benefit of membership. This week, we focus on MCAA’s new safety training video, Master the Mechanics: Hand & Power Tool Safety for the Mechanical Trades. The video provides trainees with information on the most common hand and power tool injuries in the mechanical construction and service trades. It highlights the tools most likely to be involved in an injury incident, and teaches proper use of the tools to help prevent injuries.…
MCAA extends a warm welcome to Raffi Elchemmas, who will be joining the staff starting August 2, 2021. He will be MCAA’s new Executive Director of Safety, Health and Risk Management, learning the ropes before Pete's upcoming retirement. Raffi comes to us from Milwaukee Tool, where he was the National Manager, Health & Safety. He is a board-certified ergonomist with an MBA in Sales Leadership & Health Sector Management from DePaul University. He has been a member of MCAA’s Safety and Health Committee since 2019. MCAA is pleased to welcome Raffi to the staff, and his wife Martha, daughter Nina, and son Vartan to the MCAA staff family.…
STIHL is recalling to repair certain TS 410 and TS 420 cut-off machines manufactured between January 2021 and April 2021. In some of these machines the flywheel can break apart while the engine is running, posing a projectile hazard to the users or bystanders. If you have any of these machines, immediately discontinue use and take them to an authorized STIHL dealer for free repair. …

MCAA’s GreatFutures Virtual Fall Program kicks off tomorrow, September 15. Each of the 17 presentations is meant to help guide students through the proposal and bid process for the annual MCAA Student Chapter Competition project. Don't forget to register! http://ow.ly/w63v50BqCSg

MCAA is excited to announce REGISTRATION IS OPEN for the PCA Virtual Education Series! This year, attendees will virtually walk through seven workstations at JPG Plumbing & Mechanical Service, Inc. as representatives speak about the various aspects. http://ow.ly/DHGK50Bgm0C

Register today for MCAA’s GreatFutures Virtual Fall Program starting September 15 through November 17! Each presentation is meant to help students navigate the proposal and bid process for the annual Student Chapter Competition project. https://t.co/7aHJmLEgKE

Registration is open for MCAA’s GreatFutures Fall Virtual Program! From September 15 through November 17, MCAA will host 17 presentations aimed at guiding our student chapters through creating a bid for the annual MCAA Student Chapter Competition project. http://ow.ly/mfbe50B7SZd

Load More...